Interface circuit between AD574A and PC bus
Source: InternetPublisher:supremeOne Keywords: Bus interface circuit PC AD Updated: 2020/05/10
An example of AD574A in 12-bit conversion mode interfacing with PC bus through 82F/5A is given . In the figure, the -12/8 pin of AD574A
is connected to 5V, and Ao is connected to ground, so that AD674AI operates in 12-bit conversion and readout mode. CE, CS and R/C are
connected to PC2 ~ PC O.
The C port of iHd 8255A can output control signals to them. Port A and port B of 8255A both work in mode 0,
the upper part of port AO, port B and port C is the input mode - and the lower part of port e is the output mode. The analog signal input to AD 5 74A adopts unipolar input mode
, and the analog voltage of o-iov is input through the l01nN input terminal. 8255A system address 2COH—2C3H.
- Make a simple AM radio with digital circuit
- Purpose and composition of amplifier circuit: low frequency voltage amplifier amplifier circuit
- Sunday Reminder
- AD108 frequency multiplier capable of inputting asymmetric square wave
- Odd-frequency counter with symmetrical output waveform (SN7474, SN74163)
- Demonstration device for capacitor charging and discharging process
- Simple and practical circuit designed using diode forward voltage drop
- Broadband transconductance operational amplifier and buffer OPA660 common emitter (common-E) amplifier circuit
- Broadband transconductance operational amplifier and buffer OPA660 common collector (common-C) amplifier circuit
- Typical application circuit of LM4911 for dual-channel amplifier
- AD7730 digital pressure measurement circuit
- AD574 and RS-232C interface circuit
- AD574A Unipolar and Bipolar Input Circuitb
- Introduction to the high-precision ±5V reference source AD586
- AD7982 differential conversion single-ended signal circuit diagram
- Charging circuit personal working principle diagram
- Internal circuit principle of M2150AD
- AD2S80A typical connection circuit
- The sensor and AD694 form a 4 to 20mA transmitter circuit
- Using AD586 to generate - 5.000V voltage circuit diagram