Home > Control Circuits >Motor Control > Coil internal short circuit test circuit

Coil internal short circuit test circuit

Source: InternetPublisher:3228 Updated: 2017/10/19

线圈内部短路测试电路 When a local short circuit occurs in the motor stator coil, it cannot be measured with a multimeter. The test circuit as shown in the figure can complete the internal short circuit test of the coil. Transistor VT, inductor coil L and capacitors C1, C2, etc. form a capacitive three-point oscillation circuit. When the measured sub-coil is connected across the A and B ends of the oscillation circuit, if there is no short-circuit fault, the measured coil shows high impedance, which does not affect the operation of the oscillator, and the mA pointer of the milliamp meter has no obvious movement. When the coil under test has a short-circuit fault, connecting it in parallel to ends A and B will cause the Q value of the oscillation circuit to drop, causing the oscillation to weaken or stop. At this time, the reading of the mA meter will drop rapidly.

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号