A stepper motor and its driving principle circuit diagram
Source: InternetPublisher:JFET Keywords: Power supply power supply and other power supply circuits Updated: 2020/05/08
Stepper motor is an open-loop control element stepper motor device that converts electrical pulse signals into angular displacement or linear displacement. Under non-overload conditions, the motor's speed and stopping position only depend on the frequency and number of pulses of the pulse signal, and are not affected by load changes. When the stepper driver receives a pulse signal, it drives the stepper motor according to the The set direction rotates at a fixed angle, called "step angle", and its rotation runs step by step at a fixed angle.
Stepper motor is one of the most commonly used control components in industrial control and instrumentation. It has the characteristic that the input pulse is proportional to the rotation of the motor shaft. It is widely used in intelligent robots, floppy disk drives, and data machine tools. Microcomputer control of stepper motors is most suitable. The system is designed to use the 20BY-0 model stepper motor, which is suitable for +5V DC power supply, the step angle is 18 degrees, and the motor coil is composed of four phases. The figure below shows a stepper motor and its driving principle circuit diagram.
- How about the boost converter TPS61299?
- Basic connection circuit of signal and power supply composed of ISOll3
- Visible laser digital control modulation driver
- Constant current LED lamp driver circuit with soft start and anti-shock
- The constant current source composed of two transistors can drive high power
- Using CW34603 to form a circuit to change the polarity of the output power supply
- Voltage-current converter constructed with XTR110
- A simple positive and negative power supply circuit
- Homemade low-power UPS
- Car Audio Power Supply
- Minimize noise and ripple using low-noise buck converters
- What is the purpose of connecting a capacitor between the DC power supply and ground?
- Is the power module usually called a power supply?
- Summary of key points of switching power supply PCB layout, worth collecting!
- What are the precautions for using current monitors?
- Do you know how to select the IC chip of the power adapter?
- The reason why the power supply should be set to +3.3V
- Power outage alarm circuit
- Two-way electronic music doorbell circuit
- Internal structure of CD4017