Power motor driver composed of IN8510 and DAC7520
Source: InternetPublisher:ghaytweyhtoo Keywords: DAC motor driver switch CMOS Updated: 2021/10/21
Using two BTS412B as high-side switches and two BU271L power MOSFETs
(50v, 䉉1n) as low-side switches, an H-bridge bidirectional DC motor drive circuit can be formed,
as shown in Figure 11-1l. This circuit is designed for an electrical automatic door with a continuous current of 6A.
The four-leg switch is controlled directly by CMOS logic levels. The two BTS412B status outputs
are driven by a transistor with OR logic and an LED indicates the fault status. The middle point of the left bridge arm
is connected to a 12ktl resistor to the ground so that when all four switches of the H-bridge are turned off, the BTS412B will not
mistake it for an open load. Once a load open circuit occurs, the BTS412B on the right can detect
it and send a fault signal.
- Car ice warning circuit sharing
- Use your smartphone to turn on/off the power in your home
- An automated model railroad layout project using a microcontroller
- DC motor drive circuit composed of L293D
- Light-controlled circuit design and analysis
- Design and analysis of voice control circuit
- Design and production of no-load automatic power-off device for household power supply
- PIC microcontroller controlled remote anti-theft alarm circuit
- Vibration anti-theft alarm circuit
- Simple disconnection burglar alarm
- X-Class CMOS sensor, do you know it?
- CMOS 8-bit single-chip microprocessor circuit (CXP750096 series)
- Timing circuit b composed of CMOS 555 (ICM7555)
- Timing circuit a composed of CMOS 555 (ICM7555)
- Industrial control circuit and CMOS interface circuit
- Interface circuit between CMOS and PMOS
- Interface circuit between CMOS and NMOS
- Using CMOS to form a time-adjusting welding machine circuit-b
- Using CMOS to form a time-adjusting welding machine circuit-a
- GM3044 type CMOS remote control infrared transmitter circuit
京公网安备 11010802033920号