Torque motor single-phase speed regulation circuit 2
Source: InternetPublisher:刘德华河北分华 Keywords: Motor speed control circuit BSP Updated: 2020/02/12
The circuit is shown in Figure 3-175. The voltage regulator is connected between one phase and neutral line. It is suitable for torque motors with a rated voltage of 380V
.
Since the imbalance degree of this method is not as serious as that of the line method, the working condition of the motor is better. As long as
the working speed is not too high, negative torque will basically not occur, but the range of torque adjustment is narrower.
- Working principle of one Xipu STR soft starter controlling two motors
- Add one more component to improve the phase failure protection function
- Design and production of radio remote control fan stepless speed regulator
- Design and production of wireless multi-location control switch circuit
- Simple three-phase motor phase loss protection circuit
- Audio interface protection circuit
- Delay switch made with LM431
- Ultra-short wave item left behind reminder alarm
- Home thermostat
- Preheating bath water tank water level controller
- Set timing circuit when power is on
- Self-defense anti-riot circuit
- Electronic anti-asthma circuit
- ring amplitude modulation circuit
- Voltage-controlled voltage source second-order band-pass filter circuit
- Voltage controlled power supply second-order high-pass filter circuit
- Voltage-controlled voltage source second-order active low-pass filter circuit
- Three primary color display circuit
- Guest arrival signal recognition circuit
- Sawtooth wave generator circuit (1)