2345 views|6 replies

24

Posts

0

Resources
The OP
 

I need help with some basic questions about drawing PCB packages! [Copy link]

I have some simple doubts for beginners: 1. What are the standards for selecting components? Voltage resistance, current resistance, ripple? 2. After knowing the component standards, where can I find suitable components? 3. Where can I find the standard packaging data description of the components I have found?

This post is from PCB Design

Latest reply

Go to DigiKey  Details Published on 2018-7-13 22:05
 

2w

Posts

341

Resources
2
 
The question is very general and not specific. It depends on what kind of power supply circuit you are designing. The total output of the power supply has requirements for ripple current, so you need to use devices that affect the ripple well, such as low ESR capacitors. The power supply implementation plan is also very important.
This post is from PCB Design
 
 

2w

Posts

341

Resources
3
 
Generally, after determining the components to be used, go to the official website to find the data sheet and carefully read the package data of the components. The data sheet is usually explained at the end of the data sheet.
This post is from PCB Design
 
 
 

2

Posts

1

Resources
4
 
The package is easy to find. As long as you can access Google and know the device name, you can download the datasheet.
This post is from PCB Design

Comments

Conventional commonly used components such as 0805, 0603 and other chip resistors, capacitors, diodes, etc. can be downloaded and borrowed online, or you can draw them yourself with software. There are many forum download centers, and conventional components are enough. The following recommendations are https://download.eeworld.com.cn/eewsearcher?kw=PCB%E5%B0%81%E8%A3%  Details Published on 2018-7-11 08:41
 
 
 

2w

Posts

341

Resources
5
 
Lixiaodou_163 posted on 2018-7-10 22:11 It is easy to find packages. As long as you can access Google and know the device name, you can download the datasheet
Conventional and commonly used devices such as 0805, 0603 and other SMD resistors, capacitors, diodes, etc. can be downloaded and borrowed online, or you can draw them yourself. There are many forum download centers, and conventional devices are enough. The following recommendations are https://download.eeworld.com.cn/ ... B%E5%B0%81%E8%A3%85
This post is from PCB Design
 
 
 

2w

Posts

341

Resources
6
 
Other devices, such as single-chip integrated circuit chips, etc., are described in the official website manual. Look carefully at what package it is. Some can be applied. Pay attention to the package type, but it is best to be able to draw and modify the package yourself so that you can use it flexibly.
This post is from PCB Design
 
 
 

13

Posts

2

Resources
7
 
Go to DigiKey
This post is from PCB Design
 
 
 

Guess Your Favourite
Just looking around
Find a datasheet?

EEWorld Datasheet Technical Support

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号
快速回复 返回顶部 Return list