[STM32F746 Review] Unboxing as expected

lugl4313820

[STM32F746 Review] Unboxing as expected [Copy link]

 

Thanks to the forum for hosting this issue of "Farewell to the Old: Year-end Clearance, 100+ Boards and Cards Coming, Come and Get Them If You Are Predestined", I have received the goods, and here is the report to you:

1. After unpacking, the original packaging is gone, but the packaging is good and it is intact. After turning on the screen, it can display, but the touch is not working, and the night crystal is also leaking.

2. Tragic disassembly.

I wanted to check the model and cable of the screen. The screen was glued to the development board with double-sided tape. It was glued very well, so I had to use a blade to separate them. It took me half an hour, but there was still an accident at the last moment. The last blade cut the screen cable. . . .

3. Even the almighty Taobao can’t find this screen.

The model of the screen is: LXD-BLS43. I searched for it for a whole night but couldn't find it. The cables of the screen also didn't match up, so it was very difficult to repair.

In short, this development board is what I expected. It is a bit difficult to realize the original screen. I will transplant LWIP for networking examples in the next article.

秦天qintian0303

It's not all bad, it's a unique flavor, but in the end it will be ruined by your hands

Verifone

The broken one is quite unique, but for a development board, you can't have too high requirements, just use it for what it is.

lugl4313820

Qintianqintian0303 posted on 2024-2-2 11:33 It's not completely broken yet, it has a unique flavor, but in the end it was destroyed by your hands

The main problem is that I can’t buy a screen, otherwise it could still be revived.