Any 3D printer recommendations?

T_starlost

Any 3D printer recommendations? [Copy link]

I want to get a small 3D printer to play with. Is there any recommendation for a small 3D printer suitable for DIY that is not too expensive?

wangerxian

I bought an Ender3 V2 for around RMB 1,200. I feel it is pretty good and suitable for beginners.

T_starlost

wangerxian posted on 2023-5-10 14:15 I bought an Ender3 V2 for about 1200 yuan. I feel it is okay and suitable for beginners.

I saw one on Taobao for 4 or 500 yuan. Can I use it?

吾妻思萌

wangerxian posted on 2023-5-10 14:15 I bought an Ender3 V2 for about 1200 yuan. I feel it is OK and suitable for beginners.

I saw one on Taobao for 400 or 500 yuan. Can it be used?

If you want to practice, you have an open source Raspberry Pi 3D printing old cow~ You can follow it step by step

吾妻思萌

I bought an Ender3 V2 for about 1200 yuan. I think it is OK and suitable for beginners.

What is your material? Is the wire thin? How is the precision?

wangerxian

Azuma Simeng posted on 2023-5-10 17:02 What is your material? Is the line thin? How is the precision?

Made of PLA, the thread is estimated to be a few millimeters, which is accurate enough.

wangerxian

T_starlost posted on 2023-5-10 14:41 I saw Taobao has 4,500, can I use it?

Don't buy light-curing ones, as the consumables are very expensive. Buy FDM fusion ones, which are suitable for beginners and are sufficient.

4.500 is estimated to be a smaller print size. It depends on your needs.

秦天qintian0303

3D printers are expensive because of consumables