MWC hollow cup flight control + loli control 4-channel reception (minor problems have been fixed)

It is a 3D printed frame. The flight control is very easy to use once it is adjusted. If it is not adjusted properly, it will be difficult to fly. The joystick of the remote control must be better, otherwise it will be extremely difficult to control.

It is recommended to write the firmware for the 328P chip first and then solder it to the flight control board.

Fix the following problems 1. The power supply of stc15w408 is changed to 5V. There is a chance that it cannot communicate with the remote control under 3.3V. 2. Channels 5 and 6 have separate contacts to facilitate frequency debugging.

**The 3D drawings of the rack and remote control plus the remark information "drawings" of qq1442934346 can be used to print the shell**

It's really good, it feels so good in heaven

It will be more stable to debug the flight control according to these parameters.

Demo video https://www.bilibili.com/video/BV1Y5411b7BZ/

Flight control firmware download reference https://www.moz8.com/forum.php?mod=viewthread&tid=92849&_dsign=c640a615