MartinFowler

stm32f401ccu6 core board

Overview

In this project, kicad was used to draw the package of several lead pins and the pin socket was selected. When welding, the pin header can be soldered. The usb-c port chose a 6-pin socket, which has no OTG function. Modify it by yourself if necessary.

The second version has been updated, update log: 1. Change 6pinUSB-C to 16pinUSB-C 2. Add series 10k resistor to boot0,1 3. Change the 2.2uf capacitor of vcap and the 106 capacitor of ams1117 to 0805 4. Delete vbat 5. Auto Add compatibility pin to lock switch 6. Add power indicator light and PA8 pin LED 7. Fixed the bug where PA9 and small crystal oscillator wiring overlap 8. Add JLC guest editor position Note: The second version is in the attachment, Lichuang The eda project is not updated synchronously (don’t ask why, it’s just lazy 23333)

At least. . He can shine 23333

Design Files

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2024-11-22 17:51:38

Where do errors in vector network analyzers come from?
The error sources of vector network analyzers are mainly the following three aspects: drift error, random error, and systematic error.1. Drift error: It is caused by changes in the performance of the
[Perf-V Evaluation] Environment Construction and Marquee Program Running
[i=s]This post was last edited by superstar_gu on 2021-1-29 16:04[/i]2.2.1 Setting up the Vivado hardware development environmentThe core processing chip of the Perf-V development board uses the Xilin
The relationship between serial port communication and interruption
Serial communication is divided into two parts: sending and receiving. Sending generally does not require interruption to complete, while receiving generally requires interruption to receive.The sende
How to use a wiring harness tester to measure small resistance? Here's a method
How to measure small resistance with a wiring harness tester?
Those who don't know about RF MEMS, please take a look. This is what the technology is like.
RF MEMS switches are small, micromechanical switches that consume little power and can be produced using conventional MEMS manufacturing techniques. They are similar to a light switch in a room, where
General Design Considerations for Embedded Systems
Our lives are filled with an ever-increasing number of tiny battery-powered devices and systems. These embedded systems must be powered by the same power supply for a long time to reduce recurring mai

Datasheet More

Circuits More