elleny

Dual LNB power and control IC based on LNBH26 DiSEqC 2.0 compatible

STEVAL-CBL012V1

Overview

This product evaluation board implements a DC-DC converter based on the LNBH26 device used to power LNBs inside dish antennas which receive satellite TV signals. The LNBH26 is an integrated solution for supplying/interfacing satellite LNB modules in accordance with international standards, offering a complete solution for dual-tuner satellite receivers and good performance at low cost using few external components. The LNBH26 evaluation board includes an I²C bus interface and the internal 22 kHz tone generator (factory trimmed) is controlled by the DSQIN pin (TTL compatible), permitting immediate DiSEqC™ data encoding. A fully integrated step-up DC-DC converter allows operation with a single input voltage supply source ranging from 8 V to 16 V.

Main features

Complete interface between LNB and I²C bus
Built-in DC-DC converter for single 12 V supply operation and high efficiency (typ. 93% @ 0.5 A)
Selectable output current limit using an external resistor
Compliant with main satellite receiver output voltage specifications (15 programmable levels)
Accurate built-in 22 kHz tone generator suits widely-accepted standards
22 kHz tone waveform integrity guaranteed also at no load

Low-drop post regulator and high-efficiency step-up PWM with integrated power N-MOS allowing low power losses
LPM function (low-power mode) to reduce dissipation
Overload and overtemperature internal protection with I²C diagnostic bits
LNB short-circuit dynamic protection
RoHS compliant

Design Files

Related Devices

Devices	Class	introduce	Datasheet
LNBH26	semiconductor;Analog mixed-signal IC	SWITCHING CONTROLLER	Download

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2024-11-22 13:38:07

Save 50 (last 4 places): Buy STM32WB Nucleo Bluetooth Kit (including USB Dongle)
Netizens who have plans to buy in the near future can click to enter the " e- select" discount product list to see if there is anything they need. Products in the list that are more than 200 yuan can
EEWORLD University Hall----Live Replay: Application of TI MSP430 Integrated Configurable Signal Chain Module in Sensor Measurement Field
Live replay: Application of TI MSP430 integrated configurable signal chain modules in sensor measurement : https://training.eeworld.com.cn/course/4717
DSP28335 interrupt configuration
External interrupt initialization #include “extint.h” //Both buttons and external interrupts use GPIO13, query and interrupt cannot be used at the same timevoid InitExtInt(void){ EALLOW;GpioCtrlRegs.G
Quickly get a fuel gauge working from scratch
Author: Mingmo Zhu If you are using a fuel gauge for the first time and don't know where to start, if you see so many register parameters and don't know which one to configure, if you are a little con
Experiment on the use of voltage sensor and current sensor
The following is an experiment on the use of voltage sensors and current sensors. Thanks for your advice! ! 1. Voltage sensor measures the voltage of DCDCExperimental steps:First check the model of th
Meaning of the tail vertebra
Does anyone know what GH9 after MAX9077EKA/GH9 means?

Datasheet More

Circuits More