aerobotics

Daughter board/adapter board for SPC56EL series devices in LQFP144 package

SPC56ELADPT144S

Overview

The SPC56ELADPT144S is an evaluation system supporting the STMicroelectronics SPC56ELxx family of automotive microprocessors.

The complete system consists of an SPC56XXMB motherboard and a mini module which plugs directly into the motherboard. Different mini modules are available for evaluating the whole family of devices in all supported packages.
The evaluation system (motherboard and daughter card) allows full access to the CPU, all the CPU's I/O signals, and the motherboard peripherals (such as CAN, SCI and LIN). The mini modules itself can be used as a standalone unit when access to the I/O pins or peripherals is not needed.
The MCU is not included, it must be purchased separately. Please contact your sales representative for more details.

Main features

SPC56xx modular evaluation system
On/off power switch with LED indicators
Board power supply: 12 VDC external supply voltage
Onboard STMicroelectronics L9758 voltage regulator with three simultaneous output at 1.2 V, 3.3 V and 5 V
Possibility to configure onboard peripherals to operate at 5 V or 3.3 V logic levels, depending on target
Two CAN channels with jumper enable
- One CAN channel with High-Speed transceiver and DB9 male connector
- One CAN channel with Low-Speed Fault Tolerant and High-Speed transceiver (selectable with jumpers) and DB9 male connector
Two LIN channels with jumper enable
- One channel with transceiver and pin header connector populated
- One channel with footprints only
One SCI channel with jumper enables, transceiver and DB9 female connector
Two FlexRay channels with jumper enables
- One channel with transceiver and DB9 male connector
- One channel with footprint only

Four user push buttons with jumper enable and polarity selection
Four user LED’s with jumper enables
One potentiometer for analog voltage input
Pin array for accessing all I/O signals
Expansion connectors for accessing all I/O signals
Prototyping area with 0.1” spacing and SOIC footprint
Specifications:
- Board size 110 mm x 75 mm
- 12 VDC Center Positive power supply with 2.5/5.5 mm barrel connectory
Standard connectors to SPC56XXMB

Design Files

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2024-11-22 13:25:52

【bk7231N】Tuya product line learning
Because I played too much with MCU in the past, now when I get some simple small boards, I don’t know how to continue for a while (laughs). I would like to ask netizens how to play with them? Some typ
EEWORLD University Hall ---- Deep Learning Theory (National Taiwan University Li Hongyi, Chinese)
Deep Learning Theory (National Taiwan University, Li Hongyi, Chinese) : https://training.eeworld.com.cn/course/4922Reprinted from: Reprinted from: https://www.youtube.com/watch?v=KKT2VkTdFyclist=PLJV_
Serial port related software
Serial port debugging softwareXCOM V2.2 of Atomic PunctualityVirtual serial port softwareVirtual Serial Port Driver 7.2Serial port monitoring softwareCommMonitor_111200
Simple DC voltage doubling circuit
Detailed explanation of the principle of voltage doubler circuitNote: To understand the voltage doubling circuit, we must first consider the charged capacitor as a power source. It can be connected in
MicroPython makes some objects const
micropython将部分对象变为const，以节约ram。[list] [*][url=https://github.com/micropython/micropython/commit/5b66c7b712daf67814698a87f108db9e2722f5e9]https://github.com/micropython/micropython/commit/5b66c7b712daf
Application of AT89C2051 in multi-function window
This multifunctional window has the following 5 functions: 　　1. Prevent harmful gas leakage: Automatically detect the concentration of harmful gases such as gas, smoke, alcohol, etc. in the room. When

Datasheet More

Circuits More