Parameters of terminal blocks

shaorc

As shown in the figure below, the terminal block is a double-layer pluggable terminal block

What does the number of positions in the red box in the picture mean?

It looks like there are 20 interfaces in the actual picture.

btty038

Is it symmetrical? It's a set. It looks like a jumper cap.

仙猫

Many retailers are lazy and do not provide real photos for every product. In particular, for connectors with various numbers of terminals, they often only display photos of one type in the series. Purchasers must mainly look at the list and supplement with photos, and they may accidentally misunderstand and make mistakes.

qwqwqw2088

This number of positions is indeed a parameter, I don't quite understand it, I look forward to experts to answer my questions

Find a location at Mouser with quantity 6

qwqwqw2088

PhoenixContact Brochure from Mouser Electronics

1848684[1].pdf (142.04 KB, downloads: 2)

2019-6-5 09:49 上传

点击文件名下载附件

Looking forward to having experts answer questions

topwon

qwqwqw2088 posted on 2019-6-5 09:50 PhoenixContact manual provided by Mouser Electronics. Looking forward to having experts answer questions

This part number corresponds to a 6-digit version, and the screenshot also says, "the figure shows a 5-pos.version with 10 contacts." So the figure in the screenshot shows a 5-pos.version with 10 contacts.

qwqwqw2088

topwon posted on 2019-6-5 10:04 This part number corresponds to 6 digits, and there is also a mark in the screenshot, "the figure shows a 5-pos.version with 10 contacts& ...

Below the picture in the manual is "the figure shows a 5-pos.version with 10 contacts"

Is there a difference between the number of positions and the position? Is the manufacturer's description wrong?

topwon

qwqwqw2088 posted on 2019-6-5 11:09 Below the picture in the manual is "the figure shows a 5-pos.version with 10 contacts"...

As mentioned above, manufacturers will not take a picture for each model. Generally, they will take one picture to represent a series. Therefore, it is explained when adding pictures that the picture is based on 5 positions (5-pos.) for reference. Position refers to the number of positions, that is, the number of holes in a row when viewed horizontally. Because this series is double-row, the total number of contact points must be multiplied by 2, which is 10.

qwqwqw2088

topwon posted on 2019-6-5 13:03 qwqwqw2088 posted on 2019-6-5 11:09 Below the figure in the manual is ““the figure shows a 5-pos.vers ...

OK, thanks

I usually use more and buy less, and I didn't notice that the merchants were tossing the company's buyers like this.

eastin8

1+1 position arrangement. Abbreviation 11

chenlijuan

There are relatively few such terminals.