• You can log in to your eeworld account to continue watching:
  • Principle and maintenance of switching power supply
  • Login
  • Duration:1 minutes and 59 seconds
  • Date:2017/04/12
  • Uploader:老白菜
Introduction
Switching power supply is an indispensable circuit for many electrical appliances. Do you have an in-depth understanding of its working principle during maintenance? I hope you may wish to carefully watch this video tutorial on the principle and maintenance of switching power supply provided by this site. Encyclopedia: A switching power supply is a power supply that uses modern power electronics technology to control the turn-on and turn-off time ratio of the switch tube to maintain a stable output voltage. The switching power supply is generally composed of a pulse width modulation (PWM) control IC and a MOSFET. Compared with switching power supplies and linear power supplies, the cost of both increases with the increase in output power, but the growth rates are different. At a certain output power point, the cost of linear power supplies is higher than that of switching power supplies. This point is called the cost reversal point. With the development and innovation of power electronics technology, switching power supply technology is also constantly innovating. This cost reversal point is increasingly moving to the low-output power end, which provides a broad development space for switching power supplies.

With the rapid development of power electronics technology, power electronic equipment is increasingly closely related to people's work and life, and electronic equipment is inseparable from reliable power supply. In the 1980s, computer power supplies fully realized switching power supply, taking the lead in completing the development of computers. In the 1990s, switching power supplies have entered various electronic and electrical equipment fields. Program-controlled switches, communications, electronic testing equipment power supplies, control equipment power supplies, etc. have widely used switching power supplies, which has promoted the rapid development of switching power supply technology. . Switching power supply is a power supply that uses modern power electronics technology to control the turn-on and turn-off time ratio of switching transistors to maintain a stable output voltage. Switching power supplies are generally composed of pulse width modulation (PWM) control ICs and MOSFETs. Compared with switching power supplies and linear power supplies, the cost of both increases with the increase in output power, but the growth rates are different. At a certain output power point, the cost of linear power supply is higher than that of switching power supply, which is the cost reversal point. With the development and innovation of power electronics technology, switching power supply technology is constantly innovating. This cost reversal point is increasingly moving to the low-output power end, which provides a wide range of development space for switching power supplies.

High frequency of switching power supply is the direction of its development. High frequency makes switching power supply miniaturized and allows switching power supply to enter a wider range of application fields, especially in high-tech fields. It promotes the miniaturization and lightweight of high-tech products. change. In addition, the development and application of switching power supplies are of great significance in saving energy, saving resources and protecting the environment.

There are two types of modern switching power supplies: one is DC switching power supply; the other is AC switching power supply. What is mainly introduced here is only the DC switching power supply. Its function is to convert the original power supply (coarse power) with poor power quality, such as mains power or battery power, into a higher quality DC voltage (fine power) that meets the requirements of the equipment. . The core of the DC switching power supply is the DC/DC converter. Therefore, the classification of DC switching power supplies relies on the classification of DC/DC converters. In other words, the classification of DC switching power supplies is basically the same as the classification of DC/DC converters. The classification of DC/DC converters is basically the classification of DC switching power supplies.

DC DC/DC converters can be divided into two categories according to whether there is electrical isolation between input and output: one type is isolated and is called isolated DC/DC converter; the other type is without isolation and is called non-isolated type. DC/DC converter.

Isolated DC/DC converters can also be classified according to the number of active power devices. There are two types of single-tube DC/DC converters: forward and flyback. Double-tube DC/DC converters include Double-tube Forward Converter, Double-tube Flyback Converter, Push-Pull Converter and Half-Bridge Converter. Four kinds. The four-tube DC/DC converter is a full-bridge DC/DC converter (Full-Bridge Converter).
Unfold ↓

You Might Like

Recommended Posts

About the multi-channel capture problem of MSP430F149.
In the 430f149 microcontroller, I set it to continuous mode, and capture both rising and falling edges. The program is as follows. I would like to ask, what does the red box mean? Why should I change
似水ai流年 Microcontroller MCU
What debugging environment does the stm31f1000 series use
What debugging environment and emulator should I use for the stm31f1000 series? Should I use jlink? Does anyone know? I can't use iar5.20 and jlink4.20p to emulate. Please give me some advice.
shu12 stm32/stm8
Ask an expert for an algorithm problem (frequency shift signal calculation)
[size=4]I am analyzing the upper and lower sideband information of the demodulated frequency-shifted signal, but the sideband accuracy is always not up to the requirement. I hope to get some advice fr
liukaihuaaaa DSP and ARM Processors
What kind of posts are considered as the best posts?
Please discuss what kind of posts can be considered as essential posts?
lixiaohai8211 Talking
TCPMP interface design, paid help...
Hey guys, I was assigned this task for my graduation project. The teacher was too tight on the schedule, and I was too limited in my knowledge to make it happen. I need to implement it under the simul
mu03029827 Embedded System
Problems with calling dynamic link libraries under wince
I customized a wince5.0 operating system image, and copied an application and a dynamic library into it using remote tools during runtime. The application calls the dynamic library and runs fine on ot
redworlf Embedded System

Recommended Content

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号