The IP address and MAC address are set in eboot, and D is selected to start downloading. The serial port outputs a series of Sent BOOTME to 255.255.255.255, but the device cannot be found under PB. Wh
TI CC6678 Digital Signal Processor (DSP) 50 Uses[/url][/align][align=left][/align][align=left][font=微软雅黑, sans-serif]One of the inventors of DSP,[/font][font="][size=10.5pt][url=http://www.eetimes.com
The key experiment is essentially to operate the GPIO pins of Lpc1768, but unlike the LED experiment, the key experiment is to read the GPIO pin value. As can be seen from the figure below, when the k
I used the Zhengdian Atom board to test the network port program, and the UDP point-to-point communication was successful. I want to change to broadcast mode and set the target IP address to 255.255.2
[size=4][color=#222222][font="] With the rapid development of USB technology and flash memory technology, the speed and capacity of mobile storage devices are changing with each passing day. However,