代码
#include "driverlib.h"
void main (void)
{//Stop watchdog timerWDT_A_hold(WDT_A_BASE);//Set P1.0 to output directionGPIO_setAsOutputPin(GPIO_PORT_P1,GPIO_PIN0);//Enable P1.4 internal resistance as p
The control signals sent by each system control unit are transmitted by radio waves. Each system control unit receives the transmitted information and then performs corresponding actions according to
Hey guys, I recently made a boost circuit using tps61040 to boost 5v to around 9v to power an oled display. But now the voltage has risen to 11v, and I measured FB, the fb pin is 1.39v (the manual say
[Atria AT32WB415 series Bluetooth BLE 5.0 MCU] + CAN communicationCAN communication hardwareAccording to the AT32WB415 data sheet, this chip has a CAN communication interface (2.0B active) and built-i