When routing, the Place-Line tool should automatically assign the net of the line according to the net of the connected pad. However, the net properties of the lines I draw are all empty. How should I
#includesbit LED1=P2^0; typedef unsigned char u8; typedef unsigned int u16; void delay(u16 i) { [size=5] [color=#ff0000] while(i--); [/color] // Isn't there a loop conditional expression after while h
[font=Verdana, Helvetica, Arial, sans-serif]I am not familiar with relays. Please explain the working principle of this circuit in detail. I am also not familiar with the selection of this relay. Than
Our board has a circuit as shown above.
KGL4 is connected to the IO port of the microcontroller.
I analyzed that KGL4 is low, the optocoupler is turned on, and OUT_KGL4 is at a low level.
KGL4 is high
I'm new to MPU9150, and there are no examples on the Internet for TM4C123 series. It seems that there are two methods for quaternion and PI. If anyone has examples for TM4C, please share them so that