This course is a high-quality teaching video on the principles and applications of inverters taught by Professor Li Jiusheng of Harbin Institute of Technology. The complete course has a total of 36 hours. The main circuit of the frequency converter is the power conversion part that provides voltage-regulated and frequency-modulated power to the asynchronous motor. The main circuit of the frequency converter can be roughly divided into two categories. The voltage type is a frequency converter that converts the DC of the voltage source into AC, and the filter of the DC circuit. It's a capacitor. The current type is an inverter that converts DC from a current source into AC, and its DC loop filter is an inductor. It consists of three parts: the "rectifier" that converts industrial frequency power into DC power, the "smoothing circuit" that absorbs the voltage pulsations generated in the converter and inverter, and the "inverter" that converts DC power into AC power. Transformer".
I want to design a waveform detection circuit controlled by MSP430, which needs 20-30 channels (switchable) to be sent to an oscilloscope. What type of analog switch should I use? If any expert can gi
Is there anyone familiar with DirectFB? For example, my program is as follows (a vertical screen program) (0,0) ------- | | | | | | | | ------- (240*320) I want to display it on the LCD (the LCD is a
[i=s] This post was last edited by jameswangsynnex on 2015-3-3 19:58 [/i] Daily chips are very commonly used in our lives , so how should I choose them?
A compound semiconductor composed of gallium (Ga) and nitrogen (N). The band gap is 3.45eV (equivalent to about 365nm in terms of the wavelength of light), which is three times wider than silicon (Si)
Analog electronics
京公网安备 11010802033920号
