Training

Location:Training / Hot Applications / Introduction to Industry 4.0 / 1.6 New challenges of Industry 4.0 and Industry 4.0 upgrade of existing systems

You can log in to your eeworld account to continue watching：
1.6 New challenges of Industry 4.0 and Industry 4.0 upgrade of existing systems
Login

Duration：12 minutes and 33 seconds
Date：2020/09/13

Uploader：桂花蒸

Introduction

keywords： sensor Industry 4.0 Big Data

The core of Industry 4.0 is the network system and the Internet of Things. The core is actually the further integration of data communication technology with equipment, environment and programs, so that the physical world can learn and operate intelligently like the digital world.

You Might Like

Recommended Posts

MSP430(F5529) UCS configuration explanation: The UCS of the MSP430F5XX/MSP430F6XX series devices contains five clock sources, namely: XT1CLK, VLOCLK, REFOCLK, DCOCLK and XT2CLK. For a detailed introduction to these five clocks, please refer to t; fish001 Microcontroller MCU

CC1310 Two-wire Serial Bootloader Solution: CC1310 is a Sub-1G-capable SOC in TI's Simplelink MCU series. Aiming at the application requirements of many customers who need to use the serial port for firmware upgrade, CC1310 has a built-in ROM-b; 灞波儿奔 Wireless Connectivity

gpio output: The output pin of stm8l152 chip cannot be set to 0. GPIO_LOW(GPIOD,GPIO_Pin_0); GPIO_LOW(GPIOD,GPIO_Pin_1); GPIO_Init( GPIOD, GPIO_Pin_0, GPIO_Mode_Out_PP_High_Fast); //Push-pull output GPIO_Init( GPI; 结束是开始 stm32/stm8

70 Years of Sky Heavy Equipment: Communications created the sky and created the dream of rejuvenation of the Chinese nation.; btty038 Talking

[Repost] A brief analysis of the characteristics and advantages of zero-drift amplifiers: [align=left][font=微软雅黑]Introduction[/font][/align][align=left][font=微软雅黑]Zero-drift amplifiers use a unique self-correcting technique to provide ultra-low input offset voltage (Vos) and near-zero inpu; 皇华Ameya360 Analog electronics

What should the circuit output waveform look like?: The circuit diagram is shown below, L1 and L2 are inductors. The input waveform at point A is a DC level of about 45V, and the input waveform at point B is shown in the figure below. The shaded part i; yichun417 Analog electronics

Recommended Content

Hot VideosMore

Hot ArticlesMore

Circuit

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews

Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函

京公网安备 11010802033920号