• You can log in to your eeworld account to continue watching:
  • Use the built compilation environment and the environment you built yourself
  • Login
  • Duration:6 minutes and 57 seconds
  • Date:2020/06/30
  • Uploader:桂花蒸
Introduction
As a huge system, Linux has many related research fields. In summary, there are roughly five directions:
1. Server maintenance: You need to understand Linux services, be proficient in using Shell, and understand network configuration.
2. Server development: You need to learn Linux programming and Linux network programming.
3. Embedded Linux applications: You need to learn C language and basic Linux knowledge.
4. Embedded Linux driver: In addition to learning the knowledge of "embedded Linux applications", you also need to
understand simple chip principles and some basic circuit knowledge, and you also need to have a certain understanding of the Linux kernel.
5. Linux visualization Application: In addition to learning the knowledge of "embedded Linux application", you also need
to learn the knowledge of GDK or QT or Android.
Unfold ↓

You Might Like

Recommended Posts

stm32 usb cdc communication
I was debugging the USB communication of stm32f4xx recently. I originally used HID communication, but the communication rate was not up to par. Then I wanted to change to cdc mode communication, but a
hzddyx Embedded System
[ATmega4809 Curiosity Nano Review] Unboxing
I was lucky enough to participate in this ATmega4809 development board testing event. I received the development board the day before yesterday and would like to share the unboxing experience with you
dcexpert MCU
How to burn MSBL format firmware
The development board I have is: MAX32630FTHR The debugger is: DAP-LINK Now I have a firmware program in MSBL format, and I want to burn it into it through DAP-LINK. Is there any software that can bur
wufeijian MAX32630FTHR Design Competition
What is the reason for this voltage drop?
I would like to ask you, as shown in the picture, this is the schematic diagram of a four-phase stepper motor. When testing the output terminals a and b, it is found that when Q1 is disconnected, that
elec32156 Motor Drive Control(Motor Control)
MCS-51 microcontroller reads and writes USB flash drive (CH375 chip)
CH375 is a universal interface chip for USB bus, supporting HOST mode and SLAVE mode.The schematic diagram of the circuit for MCS-51 microcontroller to read and write USB flash disk, the TXD pin of CH
rain 51mcu
The Hardships of Engineers——Comics | How to drive an engineer crazy?
Communicate with engineers and feel deeply [attach ]438544[/attach]
btty038 Talking about work

推荐文章

2.1 linux中uboot移植 2024年11月18日
(一)友善之臂介绍: README for FriendlyARM Tiny4412 说明:本u-boot源代码由三星原厂提供,并由友善之臂修改移植,以适用于Tiny4412开发板平台。 仅供嵌入式爱好者学习研究之用,友善之臂不对此提供任何技术支持和维护。 ----------------------------------------------------- 1. Bui...
学习ARM开发(2) 2024年11月14日
天是星期天,刚好在家里休息。又是学习ARM的大好时机了。 早上起得很早,因为都想着怎么样搞好这个ARM开发环境,总是心急的。搞得睡觉,也睡不好。立即把电脑打开,为了更加快点,把家里两台电脑都打开,用一台比较快的电脑装LINUX。目前因为两台电脑都已经安装WINDOWS系统,又装了很多软件。为了没有什么风险,就装了VMWARE软件,就是虚拟机软件,这个软件的虚拟速度确实快很多,...
Linux帧缓冲设备驱动程序框架及图形界面GUI的移植 2024年11月11日
硬件平台   S3C2410X是三星公司的基于ARM920T的S3C2410X芯片。S3C2410X集成了一个LCD控制器(支持STN和TFT带有触摸屏的液晶显示屏)、SDRAM、触摸屏、USB、SPI、SD和MMC等控制器,4个具有PWM功能的计时器和1个内部时钟,8通道的10位ADC,117位通用I/O口和24位外部中断源,8通道10位AD控制器,处理器工作频率最高达到2...
Linux Kernel之flush_cache_all在ARM平台下是如何实现的 2024年11月11日
在驱动程序的设计中,我们可能会用到flush_cache_all将ARM cache的内容刷新到RAM,这是因为ARM Linux中cache一般会被设定为write back的。而通常象DMA是访问不了cache,所以如果我们需要启动DMA将RAM中的内容写到Flash中或LCD framebuffer,那么我们就需要调用flush_cache_all将cache中最新的内...

Recommended Content

Hot ArticlesMore

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号