Training

Location:Training / Embedded Development / Embedded operating system / The power of open source Linux kernel source code study and practical exercises / First week course introduction

Duration：5 minutes and 3 seconds
Date：2020/03/01

Uploader：Lemontree

Introduction

keywords： Linux Modules Memory management signal Memory Barriers

1) By analyzing the kernel source code, master the specific working principles of the Linux operating system, thereby laying a solid foundation for further learning about drivers, virtualization, etc.
2) Students who pass the assessment will be qualified as Linux kernel engineers and are competent in customizing the kernel, modifying the kernel, and updating the kernel.

You Might Like

Recommended Posts

Found a problem with stm32PWM output: If the PWM output clock and pin configuration are written in external functions, such as rcc_configuration and gpio_configuration, and these two functions are executed before the PWM configuration fun; dlcnight stm32/stm8

Can't the OnPaint method be overloaded under wince+C#?: I want to make a bitmap button. I use PictureBox, but it is very slow to handle click events. So I thought of inheriting from the Button class, but found that overriding OnPaint is invalid. The follow; 860122 WindowsCE

3rd Anniversary: @soso @nmg@eric-wang@All administratorshttps://en.eeworld.com/bbs/thread-507467-1-1.htmlIt's been three years so fast. After lunch in the afternoon, I specially greeted SOSO, and she asked me to "give; suoma Talking

Some simple assembler programs: [i=s] This post was last edited by paulhyde on 2014-9-15 09:20 [/i] Some simple assembly programs, I hope it can help friends who are just starting to learn assembly~~; xianghong123 Electronics Design Contest

BIOS Issues: I have a question, that is, after the operating system is started, does it still access the hardware through the BIOS, or does the operating system completely take over the hardware and not go through; guoqingling988 Embedded System

UCF statement explanation: Today I saw someone else's ucf file. Could you please explain what it means? This is *, inst, and? , please explain, thank you! INST "*GTP_DUAL_1000X_inst?rx_elastic_buffer_inst_0?rd_addr_gray_?" TNM; gxiaob FPGA/CPLD

推荐文章

Linux内核分析：uboot与Linux内核机器码分析 2025年01月16日: 1. uboot机器码在uboot启动的start_armboot阶段，调用board_init函数初始化机器码。 int board_init(void) { .............................. gd- bd- bi_arch_number = MACH_TYPE_SMDKV210; gd- bd- bi_boot_params...

Linux内核的中断机制 2025年01月16日: 1. 中断简介中断是指在CPU正常运行期间，由于内外部事件或由程序预先安排的事件引起的CPU暂时停止正在运行的程序，转而为该内部或外部事件或预先安排的事件服务的程序中去，服务完毕后再返回去继续运行被暂时中断的程序。Linux中通常分为外部中断（又叫硬件中断）和内部中断（又叫异常）。 2. Linux内核中断机制的初始化 2.1 相关数据结构 linux内核将所有的中断统...

Linux内核静态映射表的建立过程 2025年01月16日: /* * 平台: s5pv210 * 内核版本号: 2.6.35.7 */ kernel/arch/arm/mach-s5pv210/mach-smdkc110.c 这个文件是由三星在移植内核时提供的一个很重要的文件，这个文件中的函数都是与硬件相关的。 mach-smdkc110.c文件中的smdkc110_map_io函数就是静态映射表建立过程调用的一个函数...

Linux驱动入门（七）使用定时器消除按键抖动 2025年01月16日: 一、为什么要消抖？二、如何消抖？三、Linux内核定时器四、源码五、测试本文将在Linux驱动入门（五）阻塞方式实现按键驱动的基础上，使用定时器消除按键抖动一、为什么要消抖？对于没有做硬件消抖的按键，在按下按键到电平稳定期间，会有一段抖动，此时电平会在高电平和低电平不断地跳动如果我们的按键中断采用下降沿触发，从图中可以看出有多段下降沿，那么想必按下一次按键...

Recommended Content

Hot VideosMore

Hot ArticlesMore

Circuit

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews

Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函

京公网安备 11010802033920号