• You can log in to your eeworld account to continue watching:
  • PCI bus
  • Login
  • Duration:8 minutes and 24 seconds
  • Date:2019/12/07
  • Uploader:木犯001号
Introduction
keywords: ARM Embedded bus
With the advent of the Internet 3.0 era, the Internet of Things is redefining the lifestyle and work style of the new economic world. Intelligent terminal implantation technology based on embedded microprocessor system design technology will create rich " Smart Touchpoints”. The study of this course will help you enter the technical palace of embedded microprocessor system design and understand the working principles and design methods of intelligent terminals in the Internet of Things.
Through the study of this course, you can help you understand the structure and working principles of microprocessor systems, master the software and hardware design methods of embedded microprocessor systems (SoC systems) represented by ARM, and initially possess the knowledge of computers and embedded microsystems. Analytical and application skills.
Unfold ↓

You Might Like

Recommended Posts

FCC banned frequencies
Here are some parameters for your reference: FCC banned frequencies!
JasonYoo MCU
How to learn PLC? Should I learn Siemens or Mitsubishi?
[p=28, 2, left][font=微软雅黑, "][b]Learning[/b][b]PLC[/b][b]There are actually three main ways to get started: [/b][/font][/p][p=28, 2, left][font=微软雅黑, "][b]Understanding[/b][b]PLC[/b][/font][/p][p=28,
工控老司机 MCU
High impedance circuit protection issues
I recently designed a high impedance circuit, about 500M ohms, using the AD8606 COMS precision dual op amp chip. After the circuit design was completed, it worked normally, but it was "not tough". It
bigbat Analog electronics
MCU drives 24V solenoid valve
I want to use a microcontroller to drive a 24V solenoid valve. How should I design the circuit?Can 8050 be used for triode? Thanks!
chenbingjy Analog electronics
Which LED driver chip can achieve 5W, 7W, 12W, 15W bulbs? Is there any recommendation?
Parameter input wide voltage constant current drive. Bulb lamp solution
qq400336518 LED Zone
The PWM output signal of the 28335 chip is always high
I would like to ask: The PWM signal from the 28335 chip is always at a high level, and the signal coming out of the board is also at a high level. Why is this?
lzx_18570633112 DSP and ARM Processors

推荐文章

Arm Tech Symposia 年度技术大会:诠释面向 AI 的三大支柱,与生态伙伴携手重塑未来 2024年11月20日
Arm Tech Symposia 年度技术大会今日在上海举行。作为 Arm 一年一度的技术盛会,本届大会以“让我们携手重塑未来”为主题,吸引了近 2,000 位行业专业人士、工程师以及开发者报名参会,会中聚焦生成式人工智能 (AI)、边缘 AI、大语言模型 (LLM)、芯粒 (Chiplet) 技术、AI 基础设施、智能驾驶等前沿科技,旨在推动 AI 技术在 Arm 生态系...
如何学习基于ARM平台的嵌入式系统 2024年11月19日
一、嵌入式系统的概念 着重理解 嵌入 的概念 主要从三个方面上来理解. 1、从硬件上,将基于CPU的处围器件,整合到CPU芯片内部,比如早期基于X86体系结构下的计算机,CPU只是有运算器和累加器的功能,一切芯片要造外部桥路来扩展实现,象串口之类的都是靠外部的16C550/2的串口控制器芯片实现,而目前的这种串口控制器芯片早已集成到CPU内部,还有PC机有显卡,而多数嵌入式处...
嵌入式开发学习(4) 2024年11月19日
数据传送指令:   MOV 两个寄存器之间传递。例 MOV r1,r0,将寄存器r0中的内容赋值给r1。   MVN 同MOV用法一样,区别是MOV是原值传递,而MVN是按位取反后传递。 算数运算指令:   ADD SUB RSB ADC SBC RSC 逻辑指令:   AND ORR EOR BIC   BIC的用法:BIC r0,r1,#0x1f,将r1中的数的bit0到...
嵌入式开发学习(3) 2024年11月19日
汇编指令分为指令和伪指令 指令:针对于CPU设计的指令。作用在CPU上。 伪指令:针对于编译器设计的指令。作用在编译器上,用来知道编译过程,经过编译后伪指令最终不会生成机器码。要知道,汇编指令是机器指令的助记符,最终要通过编译器翻译成CPU能直接识别的由01组成的代码(机器码)。 LDR/STR架构: ARM采用RISC架构,CPU不能直接操作内存中的内容,而需要先将内存中的...

Recommended Content

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号