• Duration:1 minutes and 5 seconds
  • Date:2019/10/30
  • Uploader:hi5
Introduction
Sensors, converters, processors and transceivers, the devices that collect and transmit data, are where the Internet of Things begins. The requirements for intelligence, high precision and reliability are critical, and ADI has been pioneering and driving the development of these devices for more than half a century. This site includes the detection, measurement, connection, power management and other related solutions provided by ADI for devices running at the forefront of the Internet of Things. Read together these practical solutions and gain the energy to drive real progress in the Internet of Things.
Unfold ↓

You Might Like

Recommended Posts

What to do with unrecognized #pragma when programming f28335?
ccs6.0.0, f28335, I defined a structure and wanted to align the data inside, which are uint8 and uint16. I wanted to align them by bytes. I originally used #pragma pack(1), but it gave a warning, whic
yangke Microcontroller MCU
Annoying, or serial port problem
The printer can receive the data sent by the serial port. Use the printer's Hex Dump to view the hexadecimal number received by the printer to confirm that the printer has received the correct data. B
lxchina Embedded System
PLC pulse controlled stepper motor
Abstract: This paper introduces the technology of PLC pulse control of stepper motor through examples.
frozenviolet Industrial Control Electronics
6678 single core spi programming steps
1. Change the cmd of the project to be burned to -stack 0x1000 -heap 0x400MEMORY { //CORE0 DDR3: o = 0x80000000, l = 0x01000000 BOOT_CORE0: o = 0x10800000, l = 0x000000c0 L2: o = 0x108000c0, l = 0x000
Aguilera DSP and ARM Processors
Looking for hardware personnel who can develop USB drivers and simple hardware
Everyone, I am working on a project and need your participation if you have experience: (1) USB driver development. (2) Ordinary telephone hardware. (3) Location: Shanghai. Experience is required. Sal
nmylx Embedded System
The SD card was reset successfully, but the initialization failed to receive 00. I hope the moderator can help.
The approximate code is as follows, using the Znfat code. The reset is successful, but the initialization is not. Please help and take a look. #include "STC12C5A32S2.H" #define DELAY_TIME 10 #define T
_ForNow_ Embedded System

Recommended Content

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号