• You can log in to your eeworld account to continue watching:
  • Multiply by a Scalar Demo
  • Login
  • Duration:1 minutes and 52 seconds
  • Date:2019/08/23
  • Uploader:抛砖引玉
Introduction
keywords: Machine Vision cv

This course is an introduction to computer vision, including the basic principles of image formation, camera imaging geometry, feature detection and matching, multi-view geometry including stereo, motion estimation and tracking, and classification. The course will cover basic development methods for relevant applications, including finding known models in images, recovering depth from stereo images, camera calibration, image stabilization, automatic alignment (e.g. panoramas), tracking and motion recognition.

This course focuses on cultivating learners' intuition and mathematical thinking, thereby allowing learners to understand the difference between theory and practice of problems. All algorithms are demonstrated in slides. But remember what Yogi Berra said: In theory, there is no difference between theory and difference, in practice, there is a difference. (Einstein said something similar). In this course, most of the time you won't need to apply high-level library functions, just low-to-mid-level algorithms to analyze images and extract structural information.


Unfold ↓

You Might Like

Recommended Posts

Ask for the parameters of integrated 73698301
Ask for the parameters of integrated 73698301Please let me know if you know. Thanks.
ramboone Sensor
Please help me look at this circuit using Proteus
See the attached picture. Why is the voltage on the RST pin of the microcontroller 2.86V? I have checked for a long time but couldn't find the problem. Please give me some advice, thank you!
xh0821 MCU
430 AD Newbie Help
void AD_INIT(void) { P6DIR=0x38; //P6.3 P6.4 P6.5 LCD uses P6SEL|=BIT0+BIT1+BIT6+BIT7; // Enable ADC channel ADC12CTL0=ADC12ON+SHT0_8+MSC; // Turn on ADC and set sampling time ADC12CTL1=SHP+CONSEQ_3;
新意的人 Microcontroller MCU
I want a program for a first-order inverted pendulum based on the 80c51 microcontroller. Thank you.
I just started to use the inverted pendulum and want to see how the program is written. Can someone share with me{:1_140:}
苗子 51mcu
Basic questions for beginners
Hello everyone, I am a newbie who has just started to get in touch with DSP. I am using the DM642 experimental box from Hezhongda to make images. I looked at the examples it provided, and there is a s
lcydhr DSP and ARM Processors
I used 430 to capture... But there was a problem when the rising edge was converted to the falling edge. Please help me solve it.
#define CM_0(0*0x4000u) /* Capture mode: 0 - disabled */ #define CM_1(1*0x4000u) /* Capture mode: 1 - pos. edge */ #define CM_2(2*0x4000u) /* Capture mode: 1 - neg. edge */ #define CM_3(3*0x4000u) /*
348210207 Microcontroller MCU

Recommended Content

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号