The output amplitude of the function signal generator displayed by the oscilloscope decreases as the output frequency of the function signal generator increases, and the output frequency is severely a
[i=s]This post was last edited by xld0932 on 2021-3-22 23:13[/i]1. HC32F460 development board
I received the HC32F460 development board from Huada sent by EEWORLD over the weekend, and I was excited t
I recently debugged 4 boards, all of which were running WinCE. The serial data was received and put into the flash, and then copied to the computer through ActiveSyc. During the test, I found a proble
[size=4]Method: After entering the string, press Ctrl+z on the new line and then press Enter. If you enter data and then press Ctrl+z and then press Enter, it will not work. [/size] [size=4] [/size] [
Currently debugging Ethernet half-duplex, using RMII interface mode, and using FPGA code to artificially create Ethernet conflicts
That is, when MAC sends, data is sent to MAC at the same time. I have
The output shaft is light in weight and strong in rigidity, and the common frequency of the axis is over 4000HZ. [img]http://www.giant-force.com.cn/chanpin/images/Article_common6.gif[/img]Using comput