• Duration:41 minutes and 29 seconds
  • Date:2018/10/01
  • Uploader:老白菜
Introduction
"Signals and Systems: Analog and Digital Signal Processing" taught by MIT Professor Alan V. Oppenheim in 1987. It can be said that this is the originator course of "Signals and Systems" taught by the founder of Signals and Systems himself. Although thirty years have passed since the recording, the charm of the course has not diminished, and many viewers have reported that they were enlightened and enlightened. The course introduces analog and digital signal processing technology. The main content includes the basic theory of linear systems, basic concepts of signals and systems, Fourier transform of continuous and discrete signals, linear time-invariant systems, etc. It is clear, vivid and intuitive, making it Learners can thoroughly understand the analysis methods of various signal systems and compare their similarities and differences.
Unfold ↓

You Might Like

Recommended Posts

Anyone who has worked on the MPC8260 I2C controller please come in!
Excuse me, does the I2C controller of MPC8260 need to be burned into microcode before it can be used? If so, how can I check whether the microcode has been burned in? I have successfully configured th
felixty Embedded System
【Share】Electromagnetic interference of power converters and related electromagnetic foundations
[color=RoyalBlue][b][size=4]Course Introduction[/size][/b][/color] [size=4]Electromagnetic interference is one of the key technologies of power electronic power converters. It is closely related to el
arui1999 Power technology
I am starting to develop zigbee, using cc2530 and debugging the instrument. I hope you can give me some advice.
I have a general understanding of the need for spectrum analyzers and network analyzers. I have no experience in this development, so I hope you can provide valuable advice on whether it is really nec
yanshilei Wireless Connectivity
The microcontroller is powered off, but the peripheral devices have power. What are the consequences?
The microcontroller has a built-in ADC and an external REF input pin. If the microcontroller is powered off, but the external REF device continues to supply power and there is still a signal at the an
john_wang MCU
Regarding the G2553 launchpad button issue
When using a photoelectric tube for black line detection, how should the G2553 IO port code the detected '0' or '1' signal?
crysislove Microcontroller MCU
Regarding the situation where OBD multi-frame transmission fails to receive data
Recently, when debugging OBD, I found that I could only receive the first frame when sending or receiving multi-frame data (multi-frame reception is in accordance with ISO-15765 single-frame multi-fra
qiyuYS Analog electronics

Recommended Content

Circuit

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号