Our company is currently using a PCI video capture card, which uses SA7111A for AD conversion = EP2C8T144 to temporarily store and control transfer data = PLX9054. A FIFO is written in the FPGA chip.
The chip powerpad is used to dissipate heat for the chip. Most chips have a powerpad. However, there are a few things to note:
The powerpad must be connected to GND and fully soldered to the GND on th
[i=s]This post was last edited by qwqwqw2088 on 2022-8-24 13:12[/i]LED driver chips can be divided into analog dimming and PWM dimming according to the dimming method.Analog dimming is relatively simp
This article talks about MIPS exceptions and interrupts. Many people may not understand the meaning of exceptions and interrupts :An exception is when an abnormal situation or special request occurs d
Basic concepts and issues
1. Bluetooth design paradigm?
When a mobile phone scans and connects to a low-power Bluetooth device, the mobile phone and the Bluetooth device form a client-server architect
When I was doing a serial communication experiment with STM32F103 recently, I used the tick timer to delay and sent data every 1s in a query mode, but only received data once in the serial debugging a