[i=s]This post was last edited by yhye2world on 2019-8-6 13:06[/i]1. Application scenario:used to measure the displacement of the tip of a signature pen;
The displacement sensor is installed inside th
I am working on the custom method (using the serial port) to program the FLASH of 430. After the program is completed, the power is turned off and reset, and the reset button can run the new program.
Method 1: 1. Select ALL in IDE Options --> Messages --> Show build messages 2. Click MAKE in IAR. If there is no error, the code size will be displayed in the Message box. Method 2: Select ALL in IDE
The first time data is received and read, it is normal. The second time data is sent, the message object does not change, and the previous data will be re-read during the next interrupt. Why is this?
AM335x itself does not have a PCIe interface. I have never done a similar design before. I would like to ask how to use AM335x to expand 2-way PCIe interface! That is, use AM335x to make a Linux syste
Automotive electronic design must provide more competitive cost advantages under the conditions of multiple design requirements such as performance, reliability, time to market, etc. This article will