Specifically designed to regulate bus voltage or drive constant current application circuits over a wide input range to 480V. This device is ideal for constant voltage/current applications requiring 4W to 100W+ power.
The LT3798's unique current sensing scheme delivers a well-regulated voltage or current to the secondary side without the use of an optocoupler. The device has low harmonic distortion and provides efficiency up to 90%. Output short-circuit protection ensures long-term reliability, while the simple and compact solution footprint accommodates a wide range of applications.
1. Introduction
I received the board a while ago. I've been a bit busy recently, so I took some time tonight to write a review of the environment setup. The environment setup is relatively simple. It
This manual is written based on the development environment of Chuanglong TMS320C6748 development board. It provides detailed and reliable process prompts and step-by-step instructions. Precautions ar
There are two types of RL phase shift circuits: leading phase shift circuit and lagging phase shift circuit. Both of these phase shift circuits utilize the phase characteristics between the current an
1. UART structure UART2 input clock is PLL1_SYSCLK2, PLL1_SYSCLK2 is PLL1_SYSCLK1 divided by 2, the frequency of PLL1_SYSCLK1 is 456MHz by default, the PLL clock tree is as shown in the figure:(Guide
12 golden rules for success before age 35Chapter 1: A goal? For a ship without a sailing goal, any wind from any direction is a headwind. 1. The first reason why you are poor is that you have not set
[i=s]This post was last edited by Xingdiyuan Machinery on 2019-8-6 14:28[/i]Speed has given cars new life, but today, our cars still cannot reach the ultimate speed. Why is this? With current technolo