Signal integrity is a term familiar to engineers in the electronics industry. After 20 years of development, its content and research objects have undergone profound changes. From the early years, it mainly focused on the timing and signal vertical parameter testing of parallel buses to the eye diagram and jitter testing of differential signals at the Gbps level, and then to today's more and more signal processing and equalization technologies at the dozens of Gbps level. Today, there are still Accompanied by the increasingly important power integrity testing and analysis and signal integrity testing across time and frequency domains. Over the past 20 years, Keysight Technologies (and its predecessor Agilent Electronic Measurement Division) has grown together with the digital test industry with excellent products and solutions. Today, it has developed into the latest full series of hardware 10bit ADC oscilloscopes with bandwidths spanning 500MHz-110GHz, MXR How can the two series of UXR and UXR perfectly answer the above problems and challenges?
1. In 2013, I posted 24 topics in total on EEWORLD. It is too difficult to count the number of replies. 2. The most unforgettable thing for you in EEWORLD in 2013 was participating in the DIY design a
[i=s]This post was last edited by zhang7309 on 2019-6-21 23:25[/i]Project Name: Indoor Environment Monitoring Terminal
1. Introduction:The indoor environment monitoring terminal can monitor the indoor
600V N-Channel Power MOSFET: FL1N60, Taiwan Fangjing Technology brand, FL1N60 specification data, mainly used for chargers, backup power supplies, etc.Features: ·Die in 6" Wafer Form·600V,1A*,N-Channe
Is there anyone who knows more about voice chips? Can you introduce a more detailed application of voice chips? It would be best if there are pictures to facilitate learning.
I use PWM to control the speed of a DC motor. Is the frequency of PWM related to the speed of the motor? Why does the motor stop turning when the frequency is 1KHZ and PWM is below 50%? Does anyone kn