Live replay: Keysight high-speed oscilloscope basics and Keysight new oscilloscope analysis-EEWORLD Training

Profile

You can learn: basics and typical applications of high-speed oscilloscopes; analysis of oscilloscope structure; waveform update rate; probe architecture, tips and tricks; jitter, eye diagram testing and basic principles; sharing of basic and typical applications of oscilloscopes; Keysight’s new oscilloscopes EXR and MXR , UXR analysis

Chapters

Chapter 1：Part1 Analysis of new oscilloscope products EXR/MXR/UXR (14 minutes and 57 seconds)
Chapter 2：Part2 Basic structure and principle of oscilloscope (32 minutes and 5 seconds)
Chapter 3：Part3.1 Measurement and analysis of signals with oscilloscope (Part 1) (3 minutes and 3 seconds)
Chapter 4：Part3.2 Measurement and analysis of signals with oscilloscope (Part 2) (22 minutes and 22 seconds)
Chapter 5：Part4 Probe technology of oscilloscope (7 minutes and 1 seconds)
Chapter 6：Part5 Precautions for using oscilloscope and probe (1 minutes and 59 seconds)

Recommended Posts

SPI communication, slave does not respond: During the debugging of SPI communication, such a phenomenon occurred. I would like to ask for your help and advice. Thank you very much! SPI uses a three-wire method, and the master and slave are the; xhrabbit MCU

Question: How to delay without using library functions?: How to delay without using library functions?; hyf9290 Embedded System

[Learning experience + power supply] My opinion on buck regulator and linear regulator: [b]In the control system designed with MCU/DSP/FPGA, the commonly used power supply chips in the circuit with low voltage input stage (generally below 12V) and output of 5V/3.3V/1.8V/1.5V/1.2V are BUC; fengye5340 Analogue and Mixed Signal

The company I work for suddenly disbanded today. I am unemployed. I am looking for a job.: I just came to Nanjing to work this month. It's only been half a month. My boss went to the United States last week. Today he suddenly called me and said that the company was dissolved and he would no; gaoyang9992006 Recruitment

About USB2.0 plug-in and switch: Can I use a high-speed analog switch such as TS3USB31 to switch DM/DP? According to the 3.0 protocol, the complete insertion/removal process needs to detect the VBus timing, and if only the data line; Ejack1979 Integrated technical exchanges

My collection of <51 e-books>: [url=http://www.qiannao.com/space/show/at89c58/Upload and share/2009/5/31/1.jpg/.page?isimg=true][img=591,623]http://pic.qiannao.com:83/servlet/ReadFileStream?filename=//at89c58/Upload and share/2009/; jxhjjm 51mcu