The baud rate set on both the MCU and the PC is 9600, no parity, 8 data bits, 1 stop bit. I use RC to generate the clock required by the MCU. Theoretically, I want to design a 4MHz clock, but the actu
[b]1. Selection tools: [/b] Luminary's function library and graphics library have a lot of integrated things, which many engineers will like. [url=https://en.eeworld.com/bbs/thread-83886-1-1.html]http
[b][color=#5E7384]This content is originally created by EEWORLD forum user [size=3]tiankai001[/size]. If you need to reprint or use it for commercial purposes, you must obtain the author's consent and
I need help from you guys, the development board STEVAL-IDB007V1 uses USB micro to connect to PC-USB, but the serial port is not recognized in the device manager
It is similar to the combination of industrial computer and PLC platform, bus card type----from hardware to software! The company does not have this strength, so it found an old senior engineer from t
Continuing from the previous post: http://topic.eeworld.net/u/20100131/15/462e28c6-78c7-41aa-a2f8-02d643802276.html I'm dizzy, and I found another wrong place (it should be abnormal) #define _RAM_STAR