A self-locking circuit, IN_MOtor_Current_DET is input to MCU, OVC_Protect comes from the sampled voltage, VDD is 5V. After power on, without Q503, the 4, 5, and 6 pins of Q503 pad are all 5V, and the
[align=left][url=http://www.deyisupport.com/blog/b/msp430/archive/2015/06/23/ti-msp432-mcu.aspx]Full explanation - Play with TI MSP432 MCU[/url][/align][align=left][/align] Abstract: The MSP430 produc
Disassemble the hard drive motor, remove the original wires, and rewrap them with large electrical wires. Stator, each wound 20 times, add a screw to facilitate future fixation
The rotor has not
I have an msp430f149 chip. When soldering, I fill the pins with solder and then remove the excess solder. Will this burn the chip? What should I pay attention to?