What are the factors that affect the load of linear motor modules? What is the maximum load of linear motor modules?

The load of the linear motor module is directly related to the load capacity of the slider during movement. Therefore, we need to understand its load capacity when selecting a linear motor module. The load of the linear motor module is affected by multiple factors, including installation and use methods, hardware structure, specifications, operating status and other factors.

1. Installation method

Is the linear motor module used horizontally or vertically? If the module is installed vertically, the vertical load also includes gravity, so the weight that the module can carry is different when the thrust is the same.

2.Module specifications

The specifications of the linear motor module profile determine the load-bearing capacity of the profile itself. The wider the profile, the greater the relative load-bearing capacity. However, if the load exceeds the limit value, the module will be deformed and damaged.

3. Rated power of the matching motor

The greater the power of the servo motor matched with the linear motor module, the greater the load, and vice versa.

4. Instantaneous speed and acceleration of the load

The higher the instantaneous speed of movement, the smaller the load capacity, and vice versa. Similarly, the greater the movement acceleration of the module slide of the same specification, the smaller the load capacity.