Introduction to the functions and operations of the Zhixing AMT hand-gear vehicle model

Zhixing AMT models completely eliminate the shift lever-type operating handle installed on the floor or instrument panel. The shift operating mechanism is integrated into the right combination switch (below the right side of the steering wheel), which is collectively called the hand-shift. The hand-shift handle integrates AMT, engine braking, retarder operation and other functions, freeing up the left foot and right hand, greatly reducing driving intensity and improving fuel economy.

The hand-shift gearbox has a high degree of integration, integrating the AMT control system; integrating the engine brake and retarder control system; its biggest highlight is that the driver can control the AMT gearbox and auxiliary brake system without taking his hands off the steering wheel, which is simple and easy to operate, greatly reducing the driving operation intensity. Compared with the gear lever handle, the hand-shift gearbox saves space in the cab, allowing the driver to use more space in the car. The editor will take you to learn more about the function operation of the Zhixing AMT hand-shift gearbox model, so that you can drive more worry-free.

Engine Braking

Applicable scenarios: When driving on slippery roads such as mud, snow, ice, and residual oil, use engine braking as much as possible.

First, keep the engine speed greater than or equal to 1500 rpm. At this time, if the engine speed is too low, you should first downshift and speed up. Then turn the engine brake knob from the "OFF" position to the "Ⅰ" or "Ⅱ" position to obtain the corresponding engine braking torque. After use, the engine brake function should be turned off in time. Turn the knob back to the "OFF" position in time.

Off Road mode

When the vehicle is driving on a muddy, bumpy or other difficult road, first stop the vehicle; second, press the Off Road mode button; third, step on the accelerator to get out of trouble according to the actual situation. Fourth, press the Off Road mode button again after getting out of trouble to exit the Off Road mode.

Predictive Driving

Predictive driving is an advanced function of the X6000 Intelligent AMT, which requires access to map information. For vehicles equipped with this function, the transmission will combine the road information fed back by the map to perform upshifts and downshifts in advance according to the road conditions ahead, avoiding gear shift lag caused by factors such as changeable road conditions. This function is optional.

Other features

01

Troubleshooting:

Zhixing AMT has a fault diagnosis function. When a transmission-related fault occurs in the vehicle, the transmission will send a fault code via a CAN message. The vehicle's instrument panel will display the fault light, fault code and corresponding detailed fault information, and consultation and processing can be performed based on the fault information.

02

Instrument display:

Zhixing AMT has the function of instrument display. After the vehicle is powered on, the vehicle instrument displays the transmission gear position, working mode, etc. through the information on the CAN bus.

03

Engine protection:

The Zhixing AMT has an engine overspeed protection function. Regardless of whether the transmission is in automatic mode or manual mode, if the engine speed is too high, the transmission will automatically disengage the clutch to prevent engine overspeed damage.

04

Clutch protection:

Zhixing AMT has a clutch protection function. When the vehicle starts on a slope or starts with a heavy load multiple times in a short period of time, the transmission will monitor the temperature of the clutch. When it detects that the clutch temperature is too high, the instrument will prompt the card user. At this time, the card user needs to stop the car and wait for the clutch temperature to drop before starting again.

05

Limp function:

The Zhixing AMT has a limp-home function. When the vehicle has some specific faults, such as failure of the gear selection, differential gear, range gear solenoid valve, etc., the transmission allows partial gear shifting and continued driving, thereby ensuring that card users can drive the vehicle away from dangerous sections and drive to a service station, thereby improving the safety and reliability of the entire vehicle.

06

Air Pressure Warning:

The Zhixing AMT has an integrated pressure sensor. When the vehicle is ready to start, if the AMT air pressure is lower than 7 bar, the vehicle will not start when the accelerator is pressed. The vehicle will not start until the air pressure reaches above 8 bar.