On the morning of November 14, Nanjing City, Jiangsu Province held an emergency drill for the 2019 large-scale power outage.
The drill simulated that the Nanjing area was hit by severe convective weather, the power grid was severely damaged, and the load reduction of the city's power grid reached more than 20%, reaching the standard of a Level III large-scale power outage. According to the plan, the Nanjing Large-Scale Power Outage Emergency Command immediately launched an emergency response, carried out anti-terrorism and emergency disposal in key areas such as chemical industry, hospitals, and stations, as well as power grid repair, focusing on the implementation of various emergency disposal processes before and after the large-scale power outage. The drill also simulated hackers invading the power dispatching and control system. Nanjing Power Supply Company organized technical forces to respond with all their strength to protect network security and the normal operation of the dispatching and control center. According to reports, this drill content is the first time it has been conducted in the country.
The Nanjing power grid is an important part of the "four vertical and five horizontal" main grid of the Jiangsu power grid. It is also an important channel for the transmission of electricity from west to east and from north to south in East China and Jiangsu power grids. The power load is rising year by year, and the pressure on the safe operation of the power grid is huge. In 2018, the Nanjing Municipal Government revised and reissued the "Nanjing Large-scale Power Outage Emergency Plan". Since the establishment of the emergency system in 2006, Nanjing Power Supply Company has insisted on conducting emergency drills for peak summer every year, special emergency drills and on-site emergency response plan emergency drills every quarter, and production system desktop exercises every week to ensure rapid response and effective response in the face of disasters.
The drill was guided by the Ministry of Emergency Management, the National Energy Administration, and the Jiangsu Provincial Development and Reform Commission (Energy Bureau), hosted by the Nanjing Development and Reform Commission, undertaken by the Nanjing Power Supply Company, and jointly participated by 13 units including the Nanjing Public Security Bureau.
Previous article:Building an energy internet should promote the integrated development of the "two networks"
Next article:The National Control Center organized a special seminar to promote the improvement of load-side control capabilities
- Popular Resources
- Popular amplifiers
- Increase the proportion of capacity leasing! Ningxia issued a notice on promoting the healthy development of energy storage
- A brief discussion on the application of energy storage power stations in cement plants
- Indian Army uses hydrogen microgrid to supply electricity in Himalayas
- CATL's Xiaoyao super hybrid battery fully opens the era of hybrid "large capacity"
- Gansu's new energy storage installed capacity exceeds 4 million kilowatts
- Hebei Weixian 100MW/400MWh energy storage power station project with a total investment of 650 million yuan started
- The world's first pioneering technology! Chengdu East New District's first 10 billion-level leading project is fully operational
- Shandong publishes registration information of two virtual power plants, capable of regulating 14.625 MW of electricity
- Musk: Tesla's energy storage business 'growing like wildfire'
- Innolux's intelligent steer-by-wire solution makes cars smarter and safer
- 8051 MCU - Parity Check
- How to efficiently balance the sensitivity of tactile sensing interfaces
- What should I do if the servo motor shakes? What causes the servo motor to shake quickly?
- 【Brushless Motor】Analysis of three-phase BLDC motor and sharing of two popular development boards
- Midea Industrial Technology's subsidiaries Clou Electronics and Hekang New Energy jointly appeared at the Munich Battery Energy Storage Exhibition and Solar Energy Exhibition
- Guoxin Sichen | Application of ferroelectric memory PB85RS2MC in power battery management, with a capacity of 2M
- Analysis of common faults of frequency converter
- In a head-on competition with Qualcomm, what kind of cockpit products has Intel come up with?
- Dalian Rongke's all-vanadium liquid flow battery energy storage equipment industrialization project has entered the sprint stage before production
- Allegro MicroSystems Introduces Advanced Magnetic and Inductive Position Sensing Solutions at Electronica 2024
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
- New real-time microcontroller system from Texas Instruments enables smarter processing in automotive and industrial applications
- App Client
- Limitations of Flash_API for C2000 Series (28335) DSP
- EEWORLD University - Power stage protection, current sensing, efficiency analysis and related TI designs
- Amplifier
- Multi-cell 36-48V Battery Management System Reference Design
- EBAZ4205 mining board transformation based on Z7010
- Samsung closes another factory in China! N+5 compensation higher than national standards
- IMX6-A9 series: display function test
- 5G in 60: An introduction to 5G
- Battery system state of charge calculation algorithm problem