Starting from June 1 this year, Tibet once again sent surplus hydropower back to Qinghai through the Qinghai-Tibet interconnection Chaila DC system, with the maximum daily transmission reaching more than 7.8 million kWh. As of August 27, 523.72 million kWh of electricity had been transmitted. The Tibet hydropower reverse transmission plan will continue until the end of September.
Unlike previous years, this is the first time since the Qinghai-Tibet interconnection project was put into operation that the Chaila DC system has exported surplus electricity from Tibet under normal high-power operation mode.
It is understood that since the project was put into operation, State Grid Qinghai Electric Power Company has continued to innovate management and continuously improved the bidirectional transmission capacity of the Chaila DC transmission system through multiple tests. The transmission power has been increased from 100,000 kilowatts in the early stage of operation to a maximum of 600,000 kilowatts. At present, the bipolar power of the Chaila DC transmission system has reached 500,000 to 600,000 kilowatts, and the high-power operation of the Chaila DC has become the norm.
"To ensure the stable operation of the lines and support the reliable export of more clean hydropower resources from Tibet, the power of the Qaidam Converter Station of the Qaidam DC system is adjusted an average of 14 times a day." Li Xiaoming, stationmaster of the Qaidam Converter Station, introduced that in response to the normalized high-load operation mode of the Qaidam DC system, the Qaidam Converter Station has formulated a special operation and maintenance guarantee plan to strengthen the special inspection management of equipment, shorten the inspection cycle of important equipment, strengthen the maintenance management of the online monitoring system, and comprehensively analyze the operating status of equipment to ensure that the Qaidam DC system operates in good condition.
In recent years, while continuously strengthening the operation and maintenance management level of the Qinghai-Tibet interconnection project, State Grid Qinghai Electric Power has successively improved the transmission capacity of line channels by constructing series compensation projects and phase-shifting systems, thereby improving the safety and stability of the Northwest Power Grid and the Chaila DC system.
As of August 27, the cumulative two-way power transmission of the ±400 kV Chala DC transmission line of the Qinghai-Tibet interconnection project exceeded 9.182 billion kWh, of which 6.288 billion kWh was transmitted from Qinghai to Tibet, and 2.894 billion kWh of surplus electricity from the Tibet power grid was exported in the summer.
Previous article:State Grid Hebei Electric Power realizes intelligent management of distribution network projects
Next article:State Grid Heilongjiang Electric Power and China Mobile deepen "multi-station integration" cooperation
- Popular Resources
- Popular amplifiers
- Increase the proportion of capacity leasing! Ningxia issued a notice on promoting the healthy development of energy storage
- A brief discussion on the application of energy storage power stations in cement plants
- Indian Army uses hydrogen microgrid to supply electricity in Himalayas
- CATL's Xiaoyao super hybrid battery fully opens the era of hybrid "large capacity"
- Gansu's new energy storage installed capacity exceeds 4 million kilowatts
- Hebei Weixian 100MW/400MWh energy storage power station project with a total investment of 650 million yuan started
- The world's first pioneering technology! Chengdu East New District's first 10 billion-level leading project is fully operational
- Shandong publishes registration information of two virtual power plants, capable of regulating 14.625 MW of electricity
- Musk: Tesla's energy storage business 'growing like wildfire'
- Innolux's intelligent steer-by-wire solution makes cars smarter and safer
- 8051 MCU - Parity Check
- How to efficiently balance the sensitivity of tactile sensing interfaces
- What should I do if the servo motor shakes? What causes the servo motor to shake quickly?
- 【Brushless Motor】Analysis of three-phase BLDC motor and sharing of two popular development boards
- Midea Industrial Technology's subsidiaries Clou Electronics and Hekang New Energy jointly appeared at the Munich Battery Energy Storage Exhibition and Solar Energy Exhibition
- Guoxin Sichen | Application of ferroelectric memory PB85RS2MC in power battery management, with a capacity of 2M
- Analysis of common faults of frequency converter
- In a head-on competition with Qualcomm, what kind of cockpit products has Intel come up with?
- Dalian Rongke's all-vanadium liquid flow battery energy storage equipment industrialization project has entered the sprint stage before production
- Allegro MicroSystems Introduces Advanced Magnetic and Inductive Position Sensing Solutions at Electronica 2024
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
- New real-time microcontroller system from Texas Instruments enables smarter processing in automotive and industrial applications
- Design and implementation of image cropping circuit based on FPGA
- MSP430 Launchpad MSP430g2452 SHT10 Temperature and Humidity Sensor
- Establishment of RF chip/modem chip design team
- F28335 uses external SRAM for program simulation
- Looking for experts in Helmholtz coil magnetic field
- Do you know about the programmer and emulator of msp430?
- How to use the VGA_SYNC_N signal in the VGA of DE1-SOC?
- ATA-1000 Series Broadband Amplifier & ATA-2000 Series High Voltage Amplifier Series Comparison
- CCS Tips: Remove the prompt when burning DSP/BIOS
- SEED-DEC6416 is available for purchase, second-hand is also acceptable