As the core of the photovoltaic power generation system, the performance of the photovoltaic inverter has a significant impact on the revenue of the photovoltaic power station. Continuously improving the applicability and reliability of the inverter system under various extremely harsh working conditions is the top priority to ensure the stable revenue of the photovoltaic power station and achieve grid parity.
Recently, Kehua Hengsheng, as the first company in China to pass the 1500V single system 1.5MW low voltage and high voltage ride-through certification of the State Grid Electric Power Research Institute, has been authoritatively recognized for the reliability and grid adaptability of Kehua Hengsheng's 1500V photovoltaic inverter system, and its technical strength is in a leading position in the industry. This is the first breakthrough in this field in China, and it is also a full reflection of Kehua Hengsheng's accumulated technical strength over the years and rich application experience in 1500V large power stations.
Kehua Hengsheng 1500V centralized inverter boost integrated system
Effectively cushion the impact of subsidy reduction
Start a new engine for photovoltaic grid parity
As the bridge of the photovoltaic system, the photovoltaic inverter is the key to reducing the cost per kilowatt-hour and improving the utilization efficiency of photovoltaics.
From 600V to 1000V, and then from 1000V to 1500V, the technological innovation has brought about the continuous improvement of power generation and photovoltaic utilization efficiency. According to IHS statistics, the global large-scale ground scene 1500V shipment volume exceeded 62% in 2018 (excluding China). The application of 1500V system brings higher voltage, longer string length, and lower equipment, cable, construction, and later operation and maintenance costs.
Reducing costs and increasing efficiency, and promoting grid parity are inevitable trends. In this process, technical breakthroughs in the safety and reliability of 1500V systems have become an important issue facing domestic new energy companies.
The voltage increase means the requirements for safety protection are improved, and the focus should be on insulation, electrical clearance, and breakdown discharge caused by the voltage increase, etc. This includes the requirements for the low voltage ride-through and high voltage ride-through capabilities of photovoltaic inverters.
High Voltage Ride Through
When a grid fault or disturbance causes a voltage increase (up to 1.3 times the grid voltage), the inverter system not only has the ability to avoid damage, but also ensures continuous operation without disconnecting from the grid.
Low Voltage Ride Through
When the grid-connected voltage of a photovoltaic power station drops due to an accident or disturbance in the power system, the photovoltaic power station can ensure continuous operation without disconnection within a certain voltage drop range and time interval. And it can continue to provide a certain amount of reactive power to the grid within the specified time/speed, continuously support the grid, and improve the reliability of the grid.
By achieving low voltage ride-through and high voltage ride-through, it can effectively ensure that the photovoltaic inverter can quickly restore active output when the power grid is restored, thereby maximizing power generation revenue and improving power grid stability.
Pushing down the cost of photovoltaic systems and promoting grid parity
At present, Kehua Hengsheng has achieved fruitful practical applications in the 1500V system, including high-altitude applications at the Qinghai Delingha Leader Base, as well as the Wuhai Leader project, a 100MW grid-connected project of a Russian power company, a 200MW project in India, and Taishan fishery-photovoltaic complementary project.
Aiming at overseas application environments, Kehua Hengsheng independently developed a 1500V centralized "turnkey" system with a single system power of up to 3.6MW. It integrates the distribution system, inverter control system and communication interaction system, and combines "monitoring", "control" and "measurement" functions to accelerate system deployment speed and reliability to the greatest extent.
The road to grid parity is long and arduous, and must be driven by key technological innovation. As a provider of new energy solutions and integrated energy services, Kehua Hengsheng is committed to improving power generation technology and providing excellent solutions to help the industry reduce costs and increase efficiency and accelerate the arrival of the era of grid parity for photovoltaics.
Previous article:Jiangsu Electric Power: Building a regional energy internet to expand energy storage scale and coverage
Next article:Comparison of industry standards between energy storage inverters and photovoltaic inverters
- Popular Resources
- Popular amplifiers
Latest New Energy Articles
- Increase the proportion of capacity leasing! Ningxia issued a notice on promoting the healthy development of energy storage
- A brief discussion on the application of energy storage power stations in cement plants
- Indian Army uses hydrogen microgrid to supply electricity in Himalayas
- CATL's Xiaoyao super hybrid battery fully opens the era of hybrid "large capacity"
- Gansu's new energy storage installed capacity exceeds 4 million kilowatts
- Hebei Weixian 100MW/400MWh energy storage power station project with a total investment of 650 million yuan started
- The world's first pioneering technology! Chengdu East New District's first 10 billion-level leading project is fully operational
- Shandong publishes registration information of two virtual power plants, capable of regulating 14.625 MW of electricity
- Musk: Tesla's energy storage business 'growing like wildfire'
MoreSelected Circuit Diagrams
MorePopular Articles
- Innolux's intelligent steer-by-wire solution makes cars smarter and safer
- 8051 MCU - Parity Check
- How to efficiently balance the sensitivity of tactile sensing interfaces
- What should I do if the servo motor shakes? What causes the servo motor to shake quickly?
- 【Brushless Motor】Analysis of three-phase BLDC motor and sharing of two popular development boards
- Midea Industrial Technology's subsidiaries Clou Electronics and Hekang New Energy jointly appeared at the Munich Battery Energy Storage Exhibition and Solar Energy Exhibition
- Guoxin Sichen | Application of ferroelectric memory PB85RS2MC in power battery management, with a capacity of 2M
- Analysis of common faults of frequency converter
- In a head-on competition with Qualcomm, what kind of cockpit products has Intel come up with?
- Dalian Rongke's all-vanadium liquid flow battery energy storage equipment industrialization project has entered the sprint stage before production
MoreDaily News
- Allegro MicroSystems Introduces Advanced Magnetic and Inductive Position Sensing Solutions at Electronica 2024
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
- New real-time microcontroller system from Texas Instruments enables smarter processing in automotive and industrial applications
Guess you like
- What is the reason! Another wind turbine fire accident! And caused a ground wildfire
- 【Iprober 520 current probe】Practical use in motor control
- Can you please help me find out where is the problem with the program?
- What are the basic units of Weber Wb and Tesla T?
- How to add c files in esp32 idf components to compile
- Have you noticed the LPDSP32 audio codec inside RSL10? Does your project use this resource?
- Will the push-pull circuit be straight through?
- Award-winning live broadcast: Third-generation TI C2000 new features resource update
- EEWORLD University - Industrial Internet of Things using CC1310 sub-1 GHz wireless MCU
- A simple way to distinguish between broadband FM and narrowband FM