The correspondence between the baud rate of 51 single-chip serial communication and the timer

Publisher:京玩儿Latest update time:2016-01-12 Source: eefocus Reading articles on mobile phones Scan QR code
Read articles on your mobile phone anytime, anywhere
This time, the course design I chose is the communication between the microcontroller and the computer. I searched the Internet for most of the day, but couldn't find the corresponding table. I made one myself and shared it with each other~

Reference address:The correspondence between the baud rate of 51 single-chip serial communication and the timer

Previous article:51 single chip microcomputer uses digital tube to display dynamic detection results
Next article:51 MCU simplex communication based on mode 1

Recommended ReadingLatest update time:2024-11-16 22:46

AT89S52 (Timer 2) Timer2
Timer counter 2 is a 16-bit timer/counter. The C/T2 bit of the T2CON register can be used to select the timing or counting function. Timer 2 has three operating modes: capture, automatic reload (incremental or decremental counting) and baud rate generator. These three modes are selected by the bits in T2CON. The speci
[Microcontroller]
AT89S52 (Timer 2) Timer2
【STM8L】STM8L timer2 generates PWM
1. Introduction This article introduces how to use timer2 in the STM8L series to generate 38K frequency PWM. Among them, this article uses the first channel (PB0) of timer2. 2. Experimental Platform Compiler software: IAR for STM8 1.42.2 Hardware platform: stm8l101f3p6 development board Emulator: ST-LINK
[Microcontroller]
【STM8L】STM8L timer2 generates PWM
Latest Microcontroller Articles
  • Download from the Internet--ARM Getting Started Notes
    A brief introduction: From today on, the ARM notebook of the rookie is open, and it can be regarded as a place to store these notes. Why publish it? Maybe you are interested in it. In fact, the reason for these notes is ...
  • Learn ARM development(22)
    Turning off and on interrupts Interrupts are an efficient dialogue mechanism, but sometimes you don't want to interrupt the program while it is running. For example, when you are printing something, the program suddenly interrupts and another ...
  • Learn ARM development(21)
    First, declare the task pointer, because it will be used later. Task pointer volatile TASK_TCB* volatile g_pCurrentTask = NULL;volatile TASK_TCB* vol ...
  • Learn ARM development(20)
    With the previous Tick interrupt, the basic task switching conditions are ready. However, this "easterly" is also difficult to understand. Only through continuous practice can we understand it. ...
  • Learn ARM development(19)
    After many days of hard work, I finally got the interrupt working. But in order to allow RTOS to use timer interrupts, what kind of interrupts can be implemented in S3C44B0? There are two methods in S3C44B0. ...
  • Learn ARM development(14)
  • Learn ARM development(15)
  • Learn ARM development(16)
  • Learn ARM development(17)
Change More Related Popular Components

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号