Count how many mobile devices you have around you now? Mobile phones, MP3s, tablet computers, laptops, digital cameras, handheld game consoles, navigation systems, etc. These devices are all powered by mobile batteries, and the battery life is also the most worrying issue.
Take mobile phones as an example. In addition to system power consumption factors, how to maintain the battery is also something you must know. Unless you can bear to replace the backup battery or external battery, in fact, mobile phones like iPhones cannot even replace the battery.
Battery maintenance may not have much effect on a single charge and discharge cycle, but after a long time, there will be a comparison. After a lithium-ion battery is used for a year or more, the battery capacity will be lost, and the loss of a well-maintained battery will be much better.
There have been many methods for lithium-ion battery maintenance on the Internet before, but the opinions are different. For example, after a new battery is brought back, it must be fully charged for 12 hours and then emptied. It takes three consecutive times to activate the maximum capacity. There is also a saying that a full charge and discharge process must be performed once a month to facilitate maintenance.
The foreign Battery University website recently released an article on how to extend the life of lithium batteries, and put forward new conclusions on the use of batteries.
They claim that the best way to maintain lithium-ion batteries is to use them lightly, discharge them quickly, and charge them quickly. This is similar to the use of mechanical equipment. The more frequently and the more times they are used, the faster the battery will lose. The less deep discharge of a lithium battery is, the longer it can be used. If possible, try to avoid frequent full charge and discharge.
For users, it is best to charge your battery when it has been used up to 10% or 20%. It is also OK to charge it when the remaining power is 50%, but try to avoid charging when the phone prompts that the battery is low. Do not use up the battery under any circumstances. If you are out and about, try to use a battery with a larger capacity or a mobile power bank.
In addition, they also pointed out that the temperature of the use environment also affects the battery life. Too high (30℃) or too low temperature will cause loss of battery life. For example, if a laptop is often connected to an adapter power source, it is best to remove the battery. In fact, this is not charging that will damage the battery, because the battery will no longer charge after it is fully charged, but if the laptop is not used with ventilation at the bottom, it will overheat, which is the real culprit affecting the battery life. Of course, if there is a better use environment or heat dissipation base, the battery can avoid the loss of unsaved data during a power outage.
Reference address:New method for lithium battery maintenance: "short discharge and short charge" for the longest durability
Take mobile phones as an example. In addition to system power consumption factors, how to maintain the battery is also something you must know. Unless you can bear to replace the backup battery or external battery, in fact, mobile phones like iPhones cannot even replace the battery.
Battery maintenance may not have much effect on a single charge and discharge cycle, but after a long time, there will be a comparison. After a lithium-ion battery is used for a year or more, the battery capacity will be lost, and the loss of a well-maintained battery will be much better.
There have been many methods for lithium-ion battery maintenance on the Internet before, but the opinions are different. For example, after a new battery is brought back, it must be fully charged for 12 hours and then emptied. It takes three consecutive times to activate the maximum capacity. There is also a saying that a full charge and discharge process must be performed once a month to facilitate maintenance.
The foreign Battery University website recently released an article on how to extend the life of lithium batteries, and put forward new conclusions on the use of batteries.
They claim that the best way to maintain lithium-ion batteries is to use them lightly, discharge them quickly, and charge them quickly. This is similar to the use of mechanical equipment. The more frequently and the more times they are used, the faster the battery will lose. The less deep discharge of a lithium battery is, the longer it can be used. If possible, try to avoid frequent full charge and discharge.
For users, it is best to charge your battery when it has been used up to 10% or 20%. It is also OK to charge it when the remaining power is 50%, but try to avoid charging when the phone prompts that the battery is low. Do not use up the battery under any circumstances. If you are out and about, try to use a battery with a larger capacity or a mobile power bank.
In addition, they also pointed out that the temperature of the use environment also affects the battery life. Too high (30℃) or too low temperature will cause loss of battery life. For example, if a laptop is often connected to an adapter power source, it is best to remove the battery. In fact, this is not charging that will damage the battery, because the battery will no longer charge after it is fully charged, but if the laptop is not used with ventilation at the bottom, it will overheat, which is the real culprit affecting the battery life. Of course, if there is a better use environment or heat dissipation base, the battery can avoid the loss of unsaved data during a power outage.
Previous article:Dynamic Power Path Management Simplifies Charging Batteries from Solar Panels
Next article:Apple iPad 2 slimming secret: battery component thickness reduced by 59%
- Popular Resources
- Popular amplifiers
Recommended Content
Latest Power Management Articles
- MathWorks and NXP Collaborate to Launch Model-Based Design Toolbox for Battery Management Systems
- STMicroelectronics' advanced galvanically isolated gate driver STGAP3S provides flexible protection for IGBTs and SiC MOSFETs
- New diaphragm-free solid-state lithium battery technology is launched: the distance between the positive and negative electrodes is less than 0.000001 meters
- [“Source” Observe the Autumn Series] Application and testing of the next generation of semiconductor gallium oxide device photodetectors
- 采用自主设计封装,绝缘电阻显著提高!ROHM开发出更高电压xEV系统的SiC肖特基势垒二极管
- Will GaN replace SiC? PI's disruptive 1700V InnoMux2 is here to demonstrate
- From Isolation to the Third and a Half Generation: Understanding Naxinwei's Gate Driver IC in One Article
- The appeal of 48 V technology: importance, benefits and key factors in system-level applications
- Important breakthrough in recycling of used lithium-ion batteries
MoreSelected Circuit Diagrams
MorePopular Articles
- Innolux's intelligent steer-by-wire solution makes cars smarter and safer
- 8051 MCU - Parity Check
- How to efficiently balance the sensitivity of tactile sensing interfaces
- What should I do if the servo motor shakes? What causes the servo motor to shake quickly?
- 【Brushless Motor】Analysis of three-phase BLDC motor and sharing of two popular development boards
- Midea Industrial Technology's subsidiaries Clou Electronics and Hekang New Energy jointly appeared at the Munich Battery Energy Storage Exhibition and Solar Energy Exhibition
- Guoxin Sichen | Application of ferroelectric memory PB85RS2MC in power battery management, with a capacity of 2M
- Analysis of common faults of frequency converter
- In a head-on competition with Qualcomm, what kind of cockpit products has Intel come up with?
- Dalian Rongke's all-vanadium liquid flow battery energy storage equipment industrialization project has entered the sprint stage before production
MoreDaily News
- Allegro MicroSystems Introduces Advanced Magnetic and Inductive Position Sensing Solutions at Electronica 2024
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- Rambus Launches Industry's First HBM 4 Controller IP: What Are the Technical Details Behind It?
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
Guess you like
- What is strong current & weak current? What is the difference between the two? I didn't expect the truth to be like this! ~
- Software and Hardware Design of Embedded GSM Short Message Interface
- WiFi will soon face challenges from other technologies or will be replaced
- What is the principle of transformer leakage inductance? Why do we need to short-circuit the secondary coil of the transformer when testing leakage inductance?
- AD9144-FMC-EBZ ADI data transfer board four-channel digital-to-analog converter evaluation board module conversion
- A40i Platform Application Notes - Huawei - ME909S-4G Module Porting Application
- The news about the Agilex M series has been released for some time, but I haven’t seen any information about the specific pin packaging, etc.?
- China's chips look forward to new breakthroughs
- dsp28335 AD sampling DMA transfer
- PIC16F1824