SynQor has announced the launch of a new battery pack, BAT-0400-M-1U-000, compatible with its military-grade uninterruptible power supplies. The new battery pack is an advanced, high-efficiency, low-weight, compact, sealed lithium polymer battery standalone unit. With a capacity of 400 watt-hours, it can extend the full-load runtime of a standard UPS device to 16 minutes. The new battery extends the operating temperature range of UPS devices. It has a built-in heater that can heat the battery from -40°C to 0°C. This allows the UPS device to charge or discharge the battery at an ambient temperature of -40°C. The battery also has features such as automatic balancing circuits between cells, over-temperature and low-temperature protection. SynQor's new battery pack performs significantly better than other similar solutions on the market. It is fully compatible with the previous battery pack BAT-0200-S-1U-000 and existing UPS. New UPS can be purchased with this new battery pack BAT-0400-M-1U-000.
SynQor UPS solutions are compact, ultra-light, and fully isolated for military and aerospace applications. They can withstand harsh and extreme electrical, shock/vibration, and other environmental conditions on site. SynQor's US-based design and manufacturing team has delivered another game-changing product that outperforms similar products in terms of output power, efficiency, reliability, flexibility, weight, and size. SynQor's UPS products have a proven track record of exceeding military specifications to provide the most efficient and reliable solutions on the market.
Features:
-
Full power operation time is greater than 16 minutes
-
Compatible with SynQor UPS-1250, UPS-1500 and UPS-3000
-
Operating temperature range -40 °C to +55 °C
-
Built-in heater
-
Primary, secondary voltage and current protection circuits
-
Automatic balancing circuit between batteries
-
Over temperature and low temperature protection function
-
LED status display
-
Weight: 5.35kg
Previous article:Toshiba launches 30V N-channel common-drain MOSFET for devices with USB and battery pack protection
Next article:Infineon and Eatron collaborate to advance automotive battery management solutions
- Popular Resources
- Popular amplifiers
- MathWorks and NXP Collaborate to Launch Model-Based Design Toolbox for Battery Management Systems
- STMicroelectronics' advanced galvanically isolated gate driver STGAP3S provides flexible protection for IGBTs and SiC MOSFETs
- New diaphragm-free solid-state lithium battery technology is launched: the distance between the positive and negative electrodes is less than 0.000001 meters
- [“Source” Observe the Autumn Series] Application and testing of the next generation of semiconductor gallium oxide device photodetectors
- 采用自主设计封装,绝缘电阻显著提高!ROHM开发出更高电压xEV系统的SiC肖特基势垒二极管
- Will GaN replace SiC? PI's disruptive 1700V InnoMux2 is here to demonstrate
- From Isolation to the Third and a Half Generation: Understanding Naxinwei's Gate Driver IC in One Article
- The appeal of 48 V technology: importance, benefits and key factors in system-level applications
- Important breakthrough in recycling of used lithium-ion batteries
- Innolux's intelligent steer-by-wire solution makes cars smarter and safer
- 8051 MCU - Parity Check
- How to efficiently balance the sensitivity of tactile sensing interfaces
- What should I do if the servo motor shakes? What causes the servo motor to shake quickly?
- 【Brushless Motor】Analysis of three-phase BLDC motor and sharing of two popular development boards
- Midea Industrial Technology's subsidiaries Clou Electronics and Hekang New Energy jointly appeared at the Munich Battery Energy Storage Exhibition and Solar Energy Exhibition
- Guoxin Sichen | Application of ferroelectric memory PB85RS2MC in power battery management, with a capacity of 2M
- Analysis of common faults of frequency converter
- In a head-on competition with Qualcomm, what kind of cockpit products has Intel come up with?
- Dalian Rongke's all-vanadium liquid flow battery energy storage equipment industrialization project has entered the sprint stage before production
- Allegro MicroSystems Introduces Advanced Magnetic and Inductive Position Sensing Solutions at Electronica 2024
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
- New real-time microcontroller system from Texas Instruments enables smarter processing in automotive and industrial applications
- Accelerometer and gyroscope
- Download of Siemens e-book "PCB Manufacturing Process - Optimization through Digital Transformation" has started~
- DP83822I Industrial Ethernet PHY auto-negotiation function and its strap resistor configuration
- 【DIY】Remodeling the mobile phone battery charger
- Modern processors and optimized code performance
- TMS320F28035 ECAN interrupt sending and receiving
- Request X-CUBE-MEMS1 firmware package
- TI CCS compiler download update
- Simple and efficient zero-point acquisition circuit
- BMS solutions for electric bicycles and electric motorcycles under the new national standard for electric vehicles