Moxa's Active Ethernet I/O Optimizes Network Video Surveillance Systems

September 9, 2010, Shanghai, China—As security monitoring systems have gradually adopted IP networks, excellent network bandwidth and overall performance are key factors to ensure effective transmission of video streams. A European company uses Moxa's ioLogik E2200 series to provide it with a smarter and safer security monitoring system solution. The ioLogik series can actively alarm based on events and supports the SNMP protocol. Compared with traditional I/O products, ioLogik uses less bandwidth and greatly simplifies web-based control.

Active alarm

The company mainly provides IP-based solutions for maritime, parking, access control and distributed facilities. They chose the ioLogik E2200 series to connect sensors and detectors in the remote monitoring system. The innovative active communication method of the ioLogik series ensures that the NVR software can quickly obtain sensor data and effectively reduce network bandwidth traffic by 80%.

I/O Solution Based on SNMP

[page]

With the support of the unique SNMP v1/v2c/v3 protocol, the ioLogik E2200 series can manage all network video surveillance devices based on the network, so that system integrators can actively obtain I/O status data with SNMP Traps and greatly improve bandwidth efficiency. With the support of the SNMPv3 protocol, all information can be verified in advance with high standards of security to ensure system security.

Support CGI commands

Moxa's active Ethernet I/O solutions support sending user-defined CGI commands, which is a common protocol in network video surveillance. With this function, the ioLogik E2200 series can easily connect to IP cameras, activate alarms, or move cameras to pre-set observation points.

Easy one-click installation

Active Ethernet I/O is designed to be flexible and easy to install. It supports multiple data transmission protocols, such as TCP/UDP, SNMP trap, SMTP (e-mail), and Modbus/TCP. In addition, Moxa's innovative Click & Go? technology uses simple IF-THEN-ELSE statements without programming, allowing users to complete I/O configuration in just a few minutes.

Key Features:

- Active reporting based on events, supporting Email, TCP/UDP and SNMP trap

- Support SNMP v3 to ensure data security communication

- Compatible with CGI commands, used in network video surveillance systems

- Easy to configure Click & Go logic statements