Analysis of performance indicators and characteristics of DPO5000B series oscilloscopes

Today's designs for faster data rates and tighter timing margins require oscilloscopes with outstanding signal acquisition performance and analysis capabilities. The DPO5000B Series oscilloscopes not only have outstanding signal fidelity, but also provide up to 2GHz bandwidth and 10GS/s sampling rate, as well as advanced analysis and mathematical operation functions, all of which are available to you at any time. Windows®-based analysis software can be run on the oscilloscope. Easily capture complex signals with just a click of the visual trigger.

Performance:

◆Four bandwidth models: 2GHz, 1GHz, 500MHz and 350MHz

◆Real-time sampling rate up to 10GS/s on one or two channels, up to 5GS/s sampling rate on all channels

◆MultiView zoom™ up to 250M points record length

◆》FastAcq™ acquisition technology,》maximum waveform capture rate of 250000wfm/s

◆FastFrame™ segmented memory acquisition mode, the number of segments is up to 290,000, and the capture rate is 310,000 waveforms/second

◆Standardly equipped 10MΩ passive voltage probe, providing "4pF capacitive load and 500MHz or 1GHz analog bandwidth

◆Vertical resolution when using HiRes sampling》11 bits

◆Users can select bandwidth limit and DSP filter to reduce noise and improve low-frequency measurement accuracy

Features:

◆Wave inspector® control function for easy navigation and automatic search of waveform data

◆Advanced triggering package, standard visual triggering and search

◆53 automatic measurements, optional filtering functions, waveform math operations and FFT analysis

◆Waveform histogram, eye diagram, TIE (jitter/timing) measurement and analysis

◆Perform user-definable mathematical operations using MATLAB, Visual Studio, and Excel

◆Optional memory analysis, advanced jitter, serial data, power and wideband RF