What are the technical parameters of the 75-50 SL-10 heat sealing and viscosity meter?

SL-10 hot tack heat seal tester is one of the most precise and stable heat seal test instruments for heat seal testing in the packaging industry! The test content includes heat sealing, heat seal testing and hot tack testing. The SL-10 heat sealing and hot tack tester provides vital information on the optimal heat sealing conditions of packaging films to determine packaging Ideal sealing conditions for thin films. Comply with ASTM F1921, ASTM F2029, QB/T2358 and other standards

Technical Parameters:

Heat sealing temperature

Measuring range: room temperature - 350°C (662°F); resolution: ±0.1°C; measurement accuracy: ±0.7°C.

Thermal Stick Sensor

Capacity: 111.2N (11.3kg); Accuracy: 0.1% Full Scale; Peeling speed: 0.04—7.87 in/sec (1—200 mm/sec).

heat seal sensor

Capacity: 4448.2N (453.6kg); Accuracy: 0.89N (0.09Kg); Calibration: ASTM E-4.

Heat sealing pressure

Range 137.9kPa-2785kPa (20 psi-400 psi); Resolution: 0.68kPa (0.1 psi).

heat seal delay time

Measuring range: 0.20 s - 99.99 s; resolution: 10 ms; controllable accuracy: ± 0.025 ms.

Heat sealing clip optional

Length: 8.0 in (20.32 cm) maximum; Width: 0.5 -1.00 in (12.7 - 25.4 mm).