Fluke DSX2 Series Copper Cable Tester Functional Introduction and Comparative Analysis

The Fluke DSX2 CableAnalyzer Series copper cable certification testers are available in two models: the DSX2-5000 CH and the DSX2-8000 CH. The Fluke DSX2-5000 CH certifies Cat 5e, 6, 6A, and Class FA twisted pair cabling to 1000 MHz. The Fluke DSX2-8000 CH certifies Cat 5e, 6, 6A, Cat 8, and Class I/II twisted pair cabling to 2000 MHz.

Fluke Copper Cable Certification Tester DSX2-5000 CH:
DSX2-5000 CH CableAnalyzer can increase the speed of copper cable certification testing, with unparalleled speed for Cat 6A and FA testing, and meets the more stringent IEC Draft V Class accuracy requirements. The ProjX management system helps ensure that the project setup is completed correctly at the first operation, and helps track the progress from project setup to system acceptance. The Versiv platform supports fiber optic testing (OLTS and OTDR modules), as well as Wi-Fi analysis and Ethernet troubleshooting. The platform is easily upgraded to support future standards. Troubleshooting can be performed faster using the Taptive user interface, which graphically displays the source of the fault, including the exact location of crosstalk, return loss, and shielding faults. Analyze test results using LinkWare? Management software to create test reports. Fluke Networks' DSX2-5000 CH CableAnalyzer is certified by Intertek (ETL) to Class IV and Draft Class V accuracy specifications of IEC-61935-1 and Class IIIe of ANSI/TIA-1152.

Fluke Copper Cable Certifier DSX2-8000 CH:
Fluke Copper Cable Certifier DSX2-8000 CH CableAnalyzer Series copper cable test solutions support testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and can handle any cabling system, whether it is Cat 5e, 6, 6A, 8 or Class FA and I/II. Cable certification is an integral part of the entire process from system design to system acceptance. The faster the process is performed, the more profitable you can be. Unfortunately, many factors can slow down the process - setting up the tester incorrectly, testing to the wrong limits, waiting for highly skilled technicians to analyze or solve problems, misinterpreting results, and generating test reports that customers cannot understand. As part of the Versiv cabling certification product family, the DSX CableAnalyzer Series provides accurate and error-free certification results. There are many teams involved in the installation process, different types of materials and multiple tests required. Only a few percentage points of profitability can make the difference. DSX certifies copper cabling to all standards including Level VI/2G accuracy requirements, making the job easier to manage and speeding up system acceptance. It is not designed just for technicians and project managers. People of all skill levels can use it to improve the process of setup, operation, test reporting and managing multiple projects simultaneously.

Fluke DSX2 Series Copper Cable Tester Functional Introduction and Comparative Analysis

Through the above comparison, it can be seen that DSX2-8000 CH is more advanced and more powerful. 8 seconds Cat6a cable certification test time, support up to 2 GHz testing, support TIA Cat 5-8 (5 to 8 categories of cables) and ISO/IEC Class C to FA and I/II on-site certification, help data communication installers to achieve system acceptance of copper and fiber projects more quickly, accurately and effectively. Not only does it meet the current needs of users, but it also meets future network cabling certification requirements, while avoiding the troubles caused by future upgrades, saving upgrade costs, and leaving room for future development.