Instructions for use of electronic dynamometer

Currently, more and more users are using electronic dynamometers. Although many users know how to use them, there are still many users who fail to follow the correct operation sequence. Today, the editor of Shigan Dynamometer will explain in detail the correct operation sequence of digital dynamometers.

Correct operation method of electronic dynamometer

1. First, turn on the power. After turning on the power switch, the power indicator light will turn on.

2. You need to wait for 15 minutes for the device to warm up and stabilize before you can connect it to the computer.

3. When choosing, we must install and fix the load sensor of the tension and compression digital dynamometer with the appropriate specifications, adjust the required test speed, and press the "zero" button on the display to make it display zero.

4. Install the fixture connecting rod and start the travel switch at gear "1". Adjust the "coarse adjustment" knob to make the panel meter read zero, then press gear "50". Adjust the "fine adjustment" knob to make the display meter read zero.

5. Press the "calibration" gear of the range switch and adjust the "calibration" knob. Make the reading on the panel meter consistent with that specified on the small broadcast board, and finally press the "zero" switch. Install the upper fixture for clamping the sample, clamp the lower fixture, then press the "50" gear, adjust the "fine adjustment" knob, and make the reading on the display instrument zero. Press the "power off" switch on the force measuring display instrument, set the "range attenuation" and "test speed", and then turn on the paper feed speed of the recorder, and then press the "down" key on the speed unit panel to test.

6. After a sample side test is completed, the following operations must be performed in the following order, and the operation process must be carried out carefully.

7. Press the "Zero" key on the tension and compression digital dynamometer display instrument. Press the "Stop" key on the speed display instrument.