Frequency conversion dielectric loss tester performance characteristics

　　1. The variable frequency dielectric loss tester has multiple measurement modes, including positive/reverse wiring, internal and external standard capacitors, CVT measurement (no external booster is required, the instrument has its own power supply), internal/external test voltage for measurement. C1/C2 can be measured simultaneously.

　　2. Accurate measurement and good repeatability: The instrument has a high test accuracy, the basic error of dielectric loss test is less than 0.0005 and the test data repeatability is excellent.

　　3. When high voltage short circuit or sudden power failure occurs, the food can quickly cut off the high voltage and send out a warning message.

　　4. High voltage output plug, no exposure, safe and reliable

　　5. High-voltage insulated wire: The insulation level of high-voltage wire not only involves safety, but also its leakage to the ground directly affects the accuracy of the reverse connection test. The high-voltage output wire of this instrument is made of special materials and can be used directly on the ground. When the output is 10KV, there is no discharge, leakage or sound to the ground.

　　6. Large screen with Chinese prompts, RS232 microcomputer interface. The instrument comes with a printer to print test data in time.

　　7. Energy resistance The instrument adopts a unique earthquake-resistant design, which can withstand earthquakes and will not be damaged.

　　8. The variable frequency dielectric loss tester is easy to carry: The volume of the instrument is about 70% of similar products, and it is very easy to carry.