Design and implementation of automatic temperature control system The automatic temperature control system based on AT89S51 and DS18B20 is designed and implemented. The temperature of the system can be set manually within a certain range, and can be automatically controlled when the temperature changes. If the measured value is higher than the set temperature, the microcontroller sends a control signal, the drive circuit stops the heater, and turns on the fan to cool down. When the temperature is lower than the set value, the microcontroller sends a control signal to start the heater.
You Might Like
Recommended ContentMore
Open source project More
Popular Components
Searched by Users
Just Take a LookMore
Trending Downloads
Trending ArticlesMore