This problem has occurred several times. When debugging with Gaoyun Yunyuan software, the FPGA suddenly had no output, the oscilloscope could not measure the waveform, and the logic analyzer had signa
DG9051/2/3: Low voltage monolithic CMOS analog switches and multiplexers, DG9051 is an 8-way multiplexer, DG9052 is a dual 4-way multiplexer, DG9053 is a 3-way single-pole double-throw (SPDT) switch,
Today I am going to test the IIC interface using an OLED screen. My touch screen is not working yet, so I will use the OLED to test our TP interface first. The wiring is as follows:After that we need