Two calibration methods of automobile brake detection device are compared, the calibration method of direct pressure with weights and the calibration method of pulling the roller upward with an instrument. Through experiments, it is known that the experimental data obtained by these two methods are basically the same; and through the comparison of the advantages and disadvantages of these two methods in practical applications, it is concluded that the calibration method of pulling the roller upward with an instrument is more accurate. Therefore, based on the entire calibration process, a calibration method of pulling the roller upward with an instrument is proposed to obtain more accurate measurement results.
You Might Like
Recommended ContentMore
Open source project More
Popular Components
Searched by Users
Just Take a LookMore
Trending Downloads
Trending ArticlesMore